
| Esp | Eng |
|---|---|
| Hola amigos creativos, el día de hoy traigo para ustedes estos LINDOS ARETES DE PERLAS Y BALINES. Esté hermoso par de aretes es hecho con perlas y balines, quedan muy elegantes ya que la combinacion del beige de las perlas y el dorado de los balines le da elegancia y los hace lucir lujosos, sofisticados y aporta glamour a nuestros atuendos. A continuación les comparto el proceso que espero les guste y la lista de materiales. | Hello creative friends, today I bring you these BEAUTIFUL PEARL AND BEAD EARRINGS. This beautiful pair of earrings is made with pearls and beads. They look very elegant, as the combination of the beige pearls and gold beads gives them a luxurious, sophisticated look and adds glamour to our outfits. Below, I'll share the process, which I hope you'll like, and the list of materials. |
| Materiales: | Materials: |
|---|---|
| Perlas número 0,03 mm, balines dorados números 0,02 mm, 2 aros medianos, alambre para bisutería, 2 anzuelos, pinzas de bisutería. | 0.03 mm pearls, 0.02 mm gold beads, 2 medium rings, jewelry wire, 2 hooks, jewelry pliers. |

| Instrucciones: | Instructions: |
|---|

| Paso 1 | Step 1 |
|---|---|
| Corté 30 cm de alambre y coloqué sobre el aro y até el alambre sobre el mismo dando varias vueltas, corté el alambre excedente usando las tenazas. | I cut 30 cm of wire and placed it over the hoop and tied the wire around it several times, cutting off the excess wire using pliers. |

| Paso 2 | Step 2 |
|---|---|
| Introduje 1 balin, 5 perlas, 1 balin por el alambre. | I inserted 1 bead, 5 pearls, and 1 bead through the wire. |

| Paso 3 | Step 3 |
|---|---|
| Até el alambre sobre el otro extremo del aro para formar la primera pieza del arete. | I tied the wire to the other end of the hoop to form the first part of the earring. |

| Paso 4 | Step 4 |
|---|---|
| Para la segunda pieza introduje 2 balin, 8 perlas, 2 balín y até el alambre al otro extremo del aro, pasando el alambre a ese lado para que la pieza quedé sobre la primera pieza. Es importante destacar que se deben hacer todas las piezas con un solo alambre por lo que debemos ir de un extremo al otro con el mismo alambre, tejiendo cada pieza. | For the second piece, I added 2 beads, 8 pearls, 2 beads, and tied the wire to the other end of the hoop, passing the wire to that side so that the piece rested on top of the first piece. It is important to note that all pieces must be made with a single wire, so we must go from one end to the other with the same wire, weaving each piece. |

| Paso 5 | Step 5 |
|---|---|
| También es importante resaltar que para construir cada pieza debemos dar varias vuelta sobre el aro para que el alambre quedé separado de la pieza que se está terminado, y así construir la siguiente pieza en un alambre independiente. | It is also important to note that to construct each piece, we must wrap the wire several times around the hoop so that the wire remains separate from the piece being finished, and thus construct the next piece on a separate wire. |

| Paso 6 | Step 6 |
|---|---|
| Para la tercera pieza o aro introduje 3 balines, 12 perlas y 3 balines para la construcción de está tercera pieza, y anudé sobre la base del aro dando vueltas con el alambre sobre la base del aro. | For the third piece or ring, I inserted 3 beads, 12 pearls, and 3 beads to construct this third piece, and I knotted it onto the base of the ring by wrapping the wire around the base of the ring. |

| Paso 7 | Step 7 |
|---|---|
| Até el alambre a la base del aro para comenzar la cuarta pieza. | I tied the wire to the base of the hoop to begin the fourth piece. |

| Paso 8 | Step 8 |
|---|---|
| Para la cuarta pieza introduje 4 balines, 16 perlas y 4 balines en el alambre para construir está cuarta pieza. | For the fourth piece, I threaded 4 beads, 16 pearls, and 4 beads onto the wire to construct this fourth piece. |

| Paso 9 | Step 9 |
|---|---|
| Llevé el alambre al otro extremo del aro para completar la cuarta pieza del arete. | I brought the wire to the other end of the hoop to complete the fourth piece of the earring. |

| Paso 10 | Step 10 |
|---|---|
| Corté con las tenazas el alambre excedente. | I cut the excess wire with the pliers. |

| Paso 11 | Step 11 |
|---|---|
| Corté un alambre de 10 cm lo doble y lo coloqué sobre el aro del anillo en forma de un nudo alondra. | I cut a 10 cm piece of wire, bent it, and placed it over the ring band in the shape of an almond knot. |

| Paso 12 | Step 12 |
|---|---|
| Introduje el alambre en el orificio del arete tipo anzuelo y anudé en la base del aro, corté el alambre excedente. | I inserted the wire into the hole in the hook-type earring and tied a knot at the base of the hoop, then cut off the excess wire. |

| Paso 13 | Step 13 |
|---|---|
| Para el otro arete repiti el mismo procedimiento. | For the other earring, repeat the same procedure. |

|
| Despedida | Farewell |
|---|---|
| Y esté es mi post para el día de hoy LINDOS ARETES DE PERLAS Y BALINES muy contenta y agradecida con Dios por el resultado. | And this is my post for today BEAUTIFUL PEARL AND BEAD EARRINGS very happy and thankful to God for the result. |


| Créditos | Credits |
|---|---|
| Traductor: www.DeepL.com/Translator (free version). Las fotos fueron tomadas con mi Celular Tecno Sport 7T. Foto de portada editada con Canva y PhotoRoom. Banner:https://images.app.goo.gl/5N3pujMb9u2AePz87. | Translator: www.DeepL.com/Translator (free version). The photos were taken with my Tecno Sport 7T cell phone . Cover photo edited es Canva and PhotoRoom. Banner:https://images.app.goo.gl/5N3pujMb9u2AePz87. |
