Está muy lindo y también sencillo en realidad seque puedo dar lo mejor para que cada uno de ustedes puedan realizar todas las ideas que les eh traído aquí espero que muy pronto vean la elaboración de mi próximo trabajo de cómo decorar un cintillos con hermosas piedras en alambre de cobre utilizando unas técnicas genial .
Estas Argollas son de mi diseño favorito yo hice hace poco unas casi igual espero que les guste y sea de agrado..
Los materiales utilizados en la elaboración de las argollas fueron está
- Piqueta de cortar
Alambre de cobre
Piedras verdes pequeñas
Piedras cuadradas verdes
Piedras transparente en forma de diamante
A continuación
Los Pasó fueron los siguientes
Paso 1
Se toma el alambre y se va integrando primero la piedra blanca .
Paso 2
Siempre una piedra blanca y una verde pero de diferentes modelos las piedras .
Paso 3
Después de todas las piedras verdes y blancas se le pone la piedra transparente en forma de diamante.
Paso 4
Viene el mismo procedimiento siempre las misma piedra que en la primera hechura las blancas y después las verdes .
Paso 5
Lo primero que vamos a hacer es tomar el alambre y darle un giro con nuestras mismas manos la forma de la argollas .
Paso 6
Con la piqueta se le hace un giro pequeño donde va insertado el otro alambre.
Paso 7
Una vez ya terminando los separadores y ya listo se pasa al otro pasó.
Paso 8
Con el alambre de cobre se hace el gancho para encajar en la argolla todo depende el largo que uno quiera la Argolla en mi caso siempre me gusta que quede casi en la oreja es mi manera de expresar como me gustan si fueran de otro diseño varía lo largo en la ocación.
Lo que se debe hacer es ir dándole la vueltas ya cuando está listo el giro s corta con la Piqueta dejando uno pequeño milímetros ro para hacer el agujero.
De modo que quede para enganchar y así sea más factible y rápido .
Paso 9
Una vez ya listo se pone en la argolla y quedará de esta manera.
Lo mejor de todo es que uno puede crear todos los paso teniendo una idea de como hacerlo.
Bueno quie les dejo mi elaboración de unas hermosas Argollas en Alambrismo en tono verde ideal para usar en cualquier tipo de ocación o evento espero sus comentarios y que les guste mucho .
Las imágenes son de mi autoria y fueron tomadas por mi teléfono Alcatel 1
Las fotos fueron editadas mediante la aplicación editor de fotos polish y los separadores se editaron en canva.
Traductor Utilizado Deepl
It is very nice and also simple in fact I know I can give my best so that each of you can realize all the ideas that I have brought you here I hope that very soon you will see the elaboration of my next work of how to decorate a headband with beautiful stones in copper wire using some great techniques .
These earrings are my favorite design I recently made some almost the same I hope you like it and it is to your liking.
The materials used in the elaboration of the earrings were these
- Cutting picket
Copper wire
Small green stones
Green square stones
Transparent diamond shaped stones
Next
The Pasó were as follows
Passed 1
The wire is taken and the white stone is integrated first.
Passed 2
Always a white stone and a green one but of different models of stones.
Passed 3
After all the green and white stones you put the transparent diamond shaped stone.
Passed 4
The same procedure always comes the same stone as in the first work, the white ones and then the green ones.
Passed 5
The first thing we are going to do is to take the wire and give it a twist with our same hands the shape of the ring.
Passed 6
With the pickaxe a small turn is made where the other wire is inserted
Passed 7
Once the separators are finished and ready, we move on to the next step.
Passed 8
With the copper wire is made the hook to fit the ring all depends on the length that one wants the ring in my case I always like it to be almost in the ear is my way of expressing how I like if they were of another design varies the length on the occasion.
What should be done is to go giving him the turns and when it is ready the turn s cut with the Piqueta leaving a small millimeters ro to make the hole.
So that it is to hook and thus it is more feasible and faster.
Passed 9
Once it is ready, put it in the ring and it will look like this.
The best of all is that you can create all the steps having an idea of how to do it.
Well, I leave you my elaboration of a beautiful green tone wire wrap wedding rings, ideal to use in any kind of occasion or event. I hope you like it and I hope you like it very much.
The images are of my authorship and were taken by my Alcatel 1 phone.
The photos were edited using polish photo editor application and the separators were edited in canva.
Translator Used Deepl