Materiales a utilizar
- Alambre de cobre
- Una piqueta
- Un tubo de plástico
- Piedras
A continuación comparto con todos ustedes el paso a paso:
Procedimiento
Paso 1
Primero que todo con el alambre de cobre se agarra y poco a poco se le va dando un giro por el tubo de plástico que en este caso sería uno de pintura de labio girando al menos 6 veces
Paso 2
Una vez ya listos los giros con la punto de arriba meterlo por dentro quedando de modo como un nudo este procedimiento se debe hacer dos veces
Luego con la Piqueta se va apretando y al final se corta y quedará de esta forma .
Paso 3
De él lado atrás queda un nudo y del lado del frente quiero decir con la otra punta se va haciendo el giro de la forma de corazón primero se mete por la parte de atrás y al hacerlo se le hace un giro de medio hasta la mitad
Una vez ya listo con la parte inferior darle otro giro como estilo ocho así queda de un modo completo dejando espacio para hacer la otra mitad del corazón
El Anillo va a tomar forma ya a lo último y es donde al final del giro va encajada la piedra de esta manera .
De esta manera se ha terminado con el procedimiento de la realización de los Anillos de alambre de cobre con una pequeña piedra . En realidadason pasos muy cortos y fáciles de hacer. siguiendo los mismo paso que se han explicado anteriormente puedes hacer tus anillos para un bonito gesto o detalle que quieras darle a cualquier persona .
Espero les guste la propuesta que les he traído en esta oportunidad. Pueden hacer también unos zarcillos y así podrás tener una hermosa pieza de zarcillos y Anillos .
Se que son muy ingeniosos y podrán lograr este bonito Anillo
Espero sus comentarios y opiniones acerca de estos Anillos. Me despido de ustedes agradeciendo su receptividad y su gran ayuda dándome las sugerencias y las reglas siempre estando dispuesta a canalizar y captar sus recomendaciones, gracias por esta bonita relación que se ha iniciado en Hive.
Muchas Gracias queridos amigos de Hive!
Las imagenes son de mi autoria y fueron Tomadas a traves de un Telefono ZTE BLADE.
Traductor utilizado: Deepl
La edicion de las fotos la realicé mediante la aplicaciones Editor de Fotos Polish y los separadores se editaron en canva.
Materials to be used.
- Copper wire
- A pickaxe
- A plastic tube
- Stones
Below I share with all of you the step by step:
Procedure
**Step 1
First of all with the copper wire is grabbed and little by little it is given a twist through the plastic tube that in this case would be one of lip paint turning at least 6 times.
**Step 2
Once the twists are ready with the top stitch, put the inside of the stitch in like a knot. This procedure must be done twice.
Then with the Piqueta it is tightened and at the end it is cut and it will be like this.
**Step 3
On the back side there is a knot and on the front side I mean with the other end you make the twist of the heart shape, first you put it in the back part and when you do it you make a twist from the middle to the middle.
Once the bottom part is ready, give it another twist like a figure eight so that it is complete leaving space to make the other half of the heart
The ring will take shape at the end of the twist and is where the stone will be embedded in this way.
In this way we have finished the procedure of making copper wire rings with a small stone. In fact, these are very short and easy to do steps. following the same steps explained above you can make your rings for a nice gesture or detail that you want to give to anyone .
I hope you like the proposal that I have brought you in this opportunity. You can also make some tendrils and so you can have a beautiful piece of tendrils and Rings .
I know that you are very ingenious and you will be able to achieve this beautiful ring.
I look forward to your comments and opinions about these Rings. I say goodbye to you thanking you for your receptivity and your great help giving me the suggestions and rules always being willing to channel and capture your recommendations, thank you for this nice relationship that has started in Hive.
Thank you very much dear friends of Hive!
The images are my own and were taken with a ZTE BLADE phone.
Translator used: Deepl
The editing of the photos was done using the Polish Photo Editor application and the separators were edited in canva.