Good day to you all here in the DIYhub community. It’s always a pleasure to be among people with a creative mindset. Every day would always be a day to learn something and gain additional knowledge to what one has learned before.

Today I would be sharing with the community HOW I CONSTRUCTED THE PLUMBING OF A PLASTIC FISH POND

Fish farming is also another lucrative business in the agricultural industry. It has always been about giving back to the community and this is done by farmers who are ready to keep their hands dirty for the people to survive.

Having a fish farm could be different ways which are either by having a pond to rear them or fishing directly from large water bodies. There are different types of ponds and it depends on the financial capability of the farmer. We have the concrete pond, the tarpaulin pond, the earthen pond, and the plastic water tank.

As an agriculturist, I would love to practice my profession and this is what made me take the step toward constructing the fish pond.

Group screenshot of my captures. All images are mine.

TOOLS/MATERIALS

SAW
KNIFE
PVC GUM
PIPES
MEASURING TAPE 📏
CHISELS
WASHERS
CONNECTORS

STEP-BY-STEP PROCESS

STEP 1: DRILLING THE PLASTIC TANK

The first thing to do was to drill the plastic tank for a hole that would serve as a channel outlet for the water stored. Without this, there is no way the water in the tank would be removed.

Sometimes some tanks come with company-drilled holes and might be in one or two directions. But if not then you have to make sure you drill yours.

STEP 2: FITTING THE WASHER

The next process after drilling the hole in the tank is to fit in the washer. The washers are like a bolt and nut that has round rubber in between. You make sure you lose it and then set the washer with the round rubber on the inner part of the tank, this is to be able to seal off the leakages of water from the tank and make it firm to the tank wall.

The next thing to be done is to tape the washer with the plumber's tape, this is to prevent leakage from the washer threads. Then after that, you can tighten the nut to the washer from the outside. Make sure it is well-screwed.

STEP 3: CUTTING OF PIPES

After fitting the washer the next step to take is cutting out the pipes into sizes. The cutting stage is one of the most difficult and important stages. Using the measuring tape you can get the size of the pipe directions and how you want it to be directed.

The aid of the saw made it easier to cut out the pipes into sizes

STEP 4: PREVIEW AND CONNECTING

The cutting was successful and I got all sizes and the required numbers.
A preview of how the connection would work out was laid on the ground to see how it would go perfectly.

Then the next thing is to apply the gum to the pipes and the connectors too. The first step to take in connection was to fit the pipe holder into the washer connected to the tank.