Hola queridos amigos de Hive y de esta maravillosa comunidad de DIYHub, espero se encuentren bien y que hayan tenido un buen y productivo día. Hoy les quiero compartir como hacer un móvil reciclando los materiales de uno que estaba roto.
Este móvil lo tenemos desde hace mas de 13 años, pero las piezas todavía están en buen estado por lo que solo tenía que lavarlo con agua y jabón para volver a usarlos. Para hacerlo mi gran ayudante y productora de ideas para hacer el móvil fue mi mamá. Espero que les guste:
Los materiales que usamos fueron:
🎐6 tubos metálicos de móvil
🎐1 círculo de madera para introducir los hilos
🎐2 metros de hilo cola de ratón de color verde.
🎐2 cristales azules grandes
🎐1 cristal redondo trasparente y grande
🎐1 flor de cristal
🎐20cm de cable
🎐10cm de alambre de cobre grueso.
🎐1 aro de llavero.
Procedimiento.
Primeramente Lavamanos las piezas del móvil.
Luego vamos a pelear el cable para tener tiras de alambre de cobre fino que entren en el aro de madera.
Ahora esos mismos alambres de cobre los pasamos por el aro de madera y hacemos unas argollas por donde entre el hilo cola de ratón, los amarramos bien cuidando que el alambre no se rompa.
Ahora vamos a ir midiendo la altura en que queramos el tubo del móvil, cortamos el hilo, lo pasamos por una de las argollas que hicimos en el paso anterior y anudamos.
Repetimos el paso anterior hasta completar los tubos. Mi mamá lo hizo con varios tamaños de hilo para que quedarán a una altura diferente cada una y de forma decreciente.
Para hacer el hilo del centro vamos a hacer un nudo en un extremo del hilo e insertamos un cristal de color azul. Luego hacemos otro nudo más arriba para añadir la flor, un nuevo nudo más arriba para otro cristal azul y por último medimos en el móvil la altura que queramos que tenga el cristal redondo del centro para hacer otro nudo e insertarlo.
Insertamos el alambre de cobre grueso por el hueco del centro y hacemos una argolla con ayuda de una pinza para introducir el hilo del centro y anudarlo allí.
En la parte superior vamos a hacer otra argolla un poco más arriba del aro de madera e insertamos el aro de llavero para poder colgarlo. Y listo, terminamos.
Que Dios los Bendiga 🙏
- Fotos de mi autoría y fueron tomadas con un celular Samsung Galaxy J6
- Traductor usado: DeepL
- Edición de imágenes a través de la app Editor de fotos Polish
- Separadores hechos con la app Editor de fotos Canva.
Hello dear friends of Hive and this wonderful DIYHub community, I hope you are well and that you have had a good and productive day. Today I want to share with you how to make a mobile by recycling the materials from a broken one.
This mobile we have it for more than 13 years, but the pieces are still in good condition so I just had to wash it with soap and water to use them again. To make it my great helper and producer of ideas to make the mobile was my mom. I hope you like it:
The materials we used were:
🎐6 metal mobile tubes.
🎐1 wooden circle to insert the threads.
🎐2 meters of green mouse tail thread.
🎐2 large blue crystals.
🎐1 large round clear glass pane
🎐1 crystal flower
🎐20cm of wire
🎐10cm of thick copper wire.
🎐1 key ring.
Procedure.
First of all, wash the mobile parts.
Then we are going to strip the wire to have strips of thin copper wire that will fit into the wooden ring.
Now we pass those same copper wires through the wooden ring and we make some rings where the mouse tail thread enters, we tie them well taking care that the wire does not break.
Now we are going to measure the height at which we want the tube of the mobile, cut the wire, pass it through one of the rings that we made in the previous step and tie the knot.
Repeat the previous step until the tubes are complete. My mom did it with different sizes of thread so that they would be at a different height each one and in a decreasing way.
To make the center thread we are going to tie a knot at one end of the thread and insert a blue colored crystal. Then we make another knot higher up to add the flower, another knot higher up for another blue crystal and finally we measure on the mobile the height we want the round crystal in the center to make another knot and insert it.
Insert the thick copper wire through the hole in the center and make a ring with the help of pliers to introduce the thread in the center and knot it there.
At the top we are going to make another ring a little above the wooden ring and insert the key ring to hang it. And that’s it, we’re done.
May God Bless you 🙏
- Photos of my authorship and were taken with a Samsung Galaxy J6 cell phone.
- Translator used: DeepL
- Image editing through the Polish Photo Editor app.
- Separators made with the Canva Photo Editor app.