Español – Spanish
Buenas noches querida comunidad de Hive y DIYHUB, esperando se encuentren bien, que hayan tenido un gran fin de semana y que se estén preparando para una nueva semana llena de bendiciones. En esta hermosa oportunidad les quiero compartir un fácil Portapastilla hecho con materiales reciclados, materiales que la mayoría tenemos en casa y que son económicos. He realizado este proyecto porque hace unos meses me estaba tomando unas pastillas que trajeron un Portapastilla de este estilo con el logo de la marca, pero la pastilla me cayó muy mal en el estómago así que la cambié, pero seguía usando el portapastillas, por lo que hoy me he ocupado de hacer uno nuevo pero que no diga absolutamente de las pastillas y así poder colocar cualquier pastilla que estemos tomando. Espero les guste:
1 caja de pastillas desarmada
Silicón líquido
Lápiz
Tijera
Regla
Hoja Blanca
Calcomanías de tema musical
Cuaderno pesado
Para empezar vamos a trazar una línea vertical en el centro de las caras laterales de la caja de pastillas.
Cortamos los dobleces superiores e inferiores de la caja a excepción de un doblez en la cara de la caja que se encuentra entre las dos líneas verticales que trazamos en el paso anterior.
Cortamos la caja por las líneas verticales y la cara opuesta a esta.
Ahora vamos a usar el silicón, bajamos el doblez que dejamos, le colocamos silicón en los extremos y pegamos las caras laterales de la caja a ella, luego añadimos más silicón a la parte de afuera de estás caras laterales y pegamos la cara opuesta que cortamos anteriormente y tenemos el portapastillas.
Para que el silicón seque bien colocamos el cuaderno grueso sobre el portapastillas por lo menos 10 minutos, hasta que seque muy bien.
Ahora vamos a decorarlo, para ello vamos a medir el portapastillas en la hoja blanca dejando un centímetro más para poder pergarla.
Cortamos la hoja blanca y la pegamos al portapastillas, primero el centímetro sobrante y luego lo demás.
Cortamos en forma de V una de las partes superiores del pastillero.
Por último pegamos las calcomanías de ambos lados de la forma que queramos. Y listo, terminamos.
Hasta la Próxima 👋
Fotos de mi autoría, tomadas con un celular Samsung Galaxy A12
Traductor: App DeepL
Edición de fotos a través de la app Editor de fotos Polish
English – Inglés
Good evening dear Hive and DIYHUB community, I hope you are well, that you had a great weekend and that you are preparing for a new week full of blessings. In this beautiful opportunity I would like to share with you an easy Pill Holder made with recycled materials, materials that most of us have at home and that are inexpensive. I have made this project because a few months ago I was taking some pills that brought a Pill Holder of this style with the logo of the brand, but the pill fell very bad in my stomach so I changed it, but I was still using the pill holder, so today I have taken care to make a new one but that does not say absolutely of the pills and so we can place any pill that we are taking. I hope you like it:
1 disassembled pill box
liquid silicone
pencil
scissors
regla
White sheet
Music themed stickers
Heavy notebook
To start we are going to draw a vertical line in the center of the side faces of the pill box.
We cut the top and bottom folds of the box except for one fold on the face of the box that is between the two vertical lines we drew in the previous step.
We cut the box along the vertical lines and the face opposite to it.
Now we are going to use the silicone, we lower the fold that we left, we put silicone on the ends and glue the side faces of the box to it, then we add more silicone to the outside of these side faces and glue the opposite face that we cut previously and we have the pill holder.
For the silicone to dry well, place the thick notebook on the template holder for at least 10 minutes, until it dries very well.
Now we are going to decorate it, for this we are going to measure the tablet holder on the white sheet leaving an extra centimeter to be able to hang it.
We cut the white sheet and glue it to the template holder, first the excess centimeter and then the rest.
We cut in a V-shape one of the upper parts of the pill holder.
Finally we glue the stickers on both sides in the way we want. And that’s it, we’re done.
See you next time 👋
Photos of my authorship, taken with a Samsung Galaxy A12 cell phone.
Translator: App DeepL
Photo editing using the Polish Photo Editor app