Hola que tal amigos de DiyHub, espero esten bien, en esta oportunidad hice un post con varios adornos que hice para una corona, espero les guste, es muy facil de hacer. Este fin de semana me inspiré para hacer los adornitos de navidad la que la corona estaba muy fea y simple aqui que quise añadirle brillo y color. ✨
Hello DiyHub friends, I hope you are well, this time I made a post with several ornaments that I made for a wreath, I hope you like it, it is very easy to do. This weekend I was inspired to make the Christmas ornaments. The wreath was very ugly and simple so I wanted to add some glitter and color to it.
Materiales para hacer el santa claus | Materials to make Santa Claus
- Retazos de foami escarchado rojo
- Retazos de foami negro
- Retazos de foami escarchado verde
- Retazos de fomi escarchado blanco
- Marabu, solo para los bordes de la barba las mangas y botas
- Silicón caliente
- Red frosted fomi scraps
- Black foami scraps
- Green frosted foami scraps
- White frosted fomi scraps
- Marabu, only for the edges of the beard, sleeves and boots
- Hot glue
Procedimiento | Procedure
Paso 1 | Step 1
Copiar el partrón en la hoja, luego solo por el borde a una cartulina.
Copy the partron on the sheet, then just along the edge to a poster board.
Paso 2 | Step 2
Cortar todas las piezas de la hoja y pasarlas al foami, luego colocamos en una plancha, el reverso del foami escarchado, luego vamos pegando todo con silicón caliente, vamos pegando primero por las esquinas y seguimos al centro.
Cut all the pieces of the leaf and transfer them to the foami, then place the back of the frosted foami on a sheet, then glue everything with hot silicone, first gluing the corners and then the center.
Materiales para hacer el dulce | Materials to make the candy
- Un rectangulo de anime
- Fieltro rojo
- Foami balnco escarchado
- Foami verde escarchado
- Estambre rojo
Procedimiento | Procedure
Paso 1 | Step 1
Sacamos el patron del caramelo con un lapicero cortamos con una tijera o cuter y pegamos el fieltro al anime, coramos pequeños rectangulos y os vamos pegando con silicón caliente. Tomamos un poco de estambre y lo pegamos por atras y luego le colocamos ( por atras ) otro pedazo de fieltro, para que se quede fijo el estambre.
We take the pattern of the candy with a pencil, cut with a scissors or cutter and glue the felt to the anime, cut small rectangles and glue with hot silicone. We take a little bit of yarn and glue it on the back and then we place (on the back) another piece of felt, so that the yarn stays fixed.
Resultado del santa y los dulces | Result of the santa and sweets
Lo que mas requiere paciencia es cuando se va a colocar el marabu, ya que se pega de los dedos.
What requires more patience is when the marabu is going to be placed, since it sticks to the fingers.
Materiales para hacer el regalo | Materials to make the gift
- Retazos de foami escarchado rojo
- Retazos de foami escarchado amarillo
- Estambre rojo
- Red frosted foami scraps
- Yellow frosted foami scraps
- Red yarn
Procedimiento | Procedure
Paso 1 | Step 1
Cortamos 6 cuadrados en el foami rojo y los vamos pegando por las esquinas, de manera que casi no se vea el silicon caliente. Colocamos unas tiras de foami escarchado amarillo en el frente del cubo.
Cut 6 squares in the red foami and glue them on the corners, so that the hot glue is almost not visible. Place a few strips of yellow frosted foami on the front of the cube.
Paso 2 | Step 2
Ahora, hacemos el lazo cortamos dos rectángulos, uno mas ancho que el otro el mas ancho va a ser la parte de arriba del lazo. La parte de arriba se le cortan unas puntas, esas puntas se colocan hacia adentro y se pegan del lado reverso. El otro rectangulo se dobla y se pega abajo.
Now, we make the bow, we cut two rectangles, one wider than the other, the wider one will be the top of the bow. The top part is cut with some points, these points are placed inside and glued on the reverse side. The other rectangle is folded and glued at the bottom.
Materiales para hacer las campanas | Materials to make the bells
- 1 Retazo de foami rojo escarchado
- Retazos de foami amarillo escarchado
- Retazos de fomai verde escarchado
- Retazos de foami fucsia
- Dos circulos de foami blanco
- Estamrbe rojo
- Algodón para rellenar las campanas
Procedimiento | Procedure
Paso 1 | Step 1
Hacemos el patrón en papel de las campanas. Luego pasamos el patrón a una cartulina, pero solo la forma externa de la figura.
We make the paper pattern of the bells. Then we transfer the pattern to a cardboard, but only the external shape of the figure.
Paso 2 | Step 2
Luego cortamos cada figura y pasamos el patron al foami, y colocamos el foami un rato en plancha para que se curve hacia adento (las hojas no).
Then we cut each figure and transfer the pattern to the foami, and place the foami on the iron for a while so that it curves towards the center (not the leaves).
Paso 3 | Step 3
Colocamos primero las hojas con silicón caliente, luego colocamos los pedazos amarillos y metemos algodón, luego pegamos el foami rosado. Luego colocamos el lazo rojo primero donde va el nudo le colocamos bastante silicón caliente, colocamos el agodón y pegamos el lazo en los bordes.
First we place the leaves with hot silicone, then we place the yellow pieces and put cotton, then we glue the pink foami. Then we put the red ribbon first where the knot goes, we put a lot of hot silicone, we put the cotton and glue the ribbon on the edges.
Resultado | Result
En esta foto pueden ver el cambio, casi sin nada de adornos y ahora. Todo muy facil y economico. Tenia tiempo sin agregar adornos y esta fue una forma economica y divertida de hacer. Eso es todo por hoy, espero les haya gustado !😁
In this photo you can see the change, almost without any ornaments and now. All very easy and inexpensive. I had some time without adding ornaments and this was a fun and economical way to do it. That's all for today, I hope you liked it!
Como siempre, gracias por ver mi post!
As always, thanks for checking out my post!
Créditos | Credits
Utilicé Canva para editar imágenes y personalicé un poco una plantilla de Canva.
I used Canva to edit images and customize a Canva template a bit.
Utilicé deepl.com para la traducción
I used deepl.com to traduction.
Todas las imagenes del paso a paso son mías, tomadas con un telefono tecno Pop 7.
All the step by step images are mine, taken with a tecno Pop 7 phone.
| |