Buenas tardes amigos de DiyHub, para este post hice un pequeño tutorial sobre un cintillo hechocon piedritas de bisuteria.
good afternoon friends of DiyHub, for this post I made a small tutorial about a headband made with small stones of costume jewelry.
Materiales | Materials
- Perlas de madera de 6 mm
- Perlas de madera de 4mm
- Hilo nylon
- Elástico
- Hilo negro normal
- Aguja
- 6 mm wooden beads
- 4mm wooden beads
- Nylon thread
- Black elastic
- Normal black thread
- Needle
Procedimiento | Procedure
Paso 1 | Step 1
Tomamos cuatro perlas redondas y cruzamos ambos hilos por la ulima, luego colocamos una perla por cada hilo, colocamos otra mas y cruzamos los dos hilos por esta ultima , repetimos el proceso hasta llegar al largo deseado. Anudamos, cortamos y escodemos los hilos.
We take four round beads and cross both threads through the last one, then we place one bead for each thread, we place another one and cross both threads through this last one, we repeat the process until we reach the desired length. Knot, cut and elbow the threads.
Paso 2 | Step 2
Luego con otro hilo lo colocamos en la perla marrón oscura del centro, sacamos un hilo por un lado y otro hilo por el otro lado, por el lado izquierdo, sacamos el hilo por la perla izquierda colocamos tres perlas de 4 mm y damos la vuelta con el hilo a la perla, pasamos el hilo en sentido contrario de esa perla y pasamos el hilo por la perla marrón del centro, luego sacamos el hilo hacia la derecha. Repetimos el mismo proceso con el lado derecho y al final sacamos el hilo por el lado derecho. Semos asi hasta completar el largo deseado del cintillo.
Then with another thread we place it in the dark brown bead in the center, we pull a thread on one side and another thread on the other side, on the left side, we pull the thread through the left bead we place three beads of 4 mm and we turn the thread around the bead, we pass the thread in the opposite direction of that bead and we pass the thread through the brown bead in the center, then we pull the thread to the right. We repeat the same process with the right side and at the end we pull the thread through the right side. We continue in this way until we complete the desired length of the headband.
Paso 3 | Step 3
Como ultimo, pasamos el elastico negro y lo casemos desde la primera perla, por ambos lados con hilo negro normal.
Lastly, we pass the black elastic through the first bead, and we sew it on both sides with normal black thread.
Resultado | Result
Y asi, es como queda , como ven el cintillo se hizo en dos cortos pasos. Lo hice en poco tiempo y no me costo tanto trabajo hacerlo, espero les haya gustado, quedó muy lindo en mi opinión.
And this is how it looks like, as you can see the headband was made in two short steps. I did it in a short time and it didn't cost me so much work to do it, I hope you liked it, it was very nice in my opinion.
Gracias por ver mi post.
Thank you for viewing my post.
Créditos | Credits
Utilicé Canva para editar imágenes y personalicé un poco una plantilla de Canva.
I used Canva to edit images and customize a Canva template a bit.
Utilicé https://www.deepl.com/es/translator para la traducción
I used https://www.deepl.com/es/translator to traduction.
Todas las imagenes del paso a paso son mías, tomadas con un telefono Tecno Pop 7 y un telefono yezz liv 1.
All the step by step images are mine, taken with Tecno Pop 7 phone and yezz liv1 phone.
| |