Hola a todos, feliz año nuevo!!!
Quiero compartir con ustedes un pequeño proceso creativo sobre uñas. Quiero aclarar que mi publicación no se centra en cuidado de las uñas ni nada por el estilo, solo quiero compartir con ustedes este proceso, ya que el resultado es un DISEÑO.
Le explico, últimamente hay algo que se aplican que en las uñas y se llama "semipermanente", esto es un método que puede aplicar a varios diseños. El de hoy se llama "ojo de gato".
Hello everyone, Happy New Year!!!
I want to share with you a little creative process involving nails. I want to clarify that my post isn't about nail care or anything like that; I just want to share this process with you, since the result is a DESIGN.
Let me explain: lately, there's something that's been applied to nails called "semi-permanent." This is a method that can be applied to various designs. Today's design is called "cat eye."
Para empezar se debe limpiar la la base donde se aplica el diseño... en este caso es una uña.
Ya que había pintura vieja se debió limpiar el área con un producto llamado "removedor mágico" esto es especial para quitar los productos UV/Led.
To begin, the base where the design will be applied must be cleaned... in this case, a nail.
Since there was old polish, the area had to be cleaned with a product called "magic remover," which is specifically designed to remove UV/LED products.
Para el segundo paso de este proceso creativo se debe limpiar y limar la superficie, esto es porque cuando se apliquen los productos se adhieran correctamente a la base o área (en este caso la uña).
Después de limpiar, retirar y limar el área es necesario que se lave con un algodón lleno de alcohol, esto es para cuidar que no quede ningun tipo de residuo ya que podría afectar nuestro proceso creativo.
For the second step in this creative process, the surface must be cleaned and filed. This ensures that the products adhere correctly to the base or area (in this case, the nail).
After cleaning, filing, and removing the polish, it's necessary to wash the area with a cotton ball soaked in rubbing alcohol. This is to ensure that no residue remains, as it could interfere with the creative process.
Se debe colocar de fondo y de primero algo llamado deshidratador, para que el área no tenga ningún tipo de grasa.
Luego se aplica algo llamado "base coat". A partir de ese proceso cada producto debe ser pasado por lámpara uv/Led.
Después se aplica algo llamado base ruber en gel, también pasado por lámpara uv/Led.
Y para casi finalizar se aplica el más esperado efecto ojo de gato en barniz. Yo escogí un color vinotinto. Ese es un esmalte que tiene micro imanes por dentro y para poder dar ese efecto brillante con la luz se debe jugar con un imán especial para este tipo de esmalte... se le da el toque que se desea ya que hay muchos métodos. También debe secarse con la lámpara.
Y para finalizar se aplica el gel top coat... este es el que sella por completo cada proceso y hace que sea difícil de remover.
Now, let's get started with the whole process.
First, you need to apply a dehydrator to remove any oil or residue from the area.
Then, you apply a base coat. From this point on, each step of the process must be cured under a UV/LED lamp.
Next, you apply a gel rubber base coat, also cured under a UV/LED lamp.
And almost finished, you apply the much-anticipated cat-eye effect polish. I chose a burgundy color. This polish contains micro-magnets, and to create that shimmering effect in the light, you use a special magnet designed for this type of polish. You can adjust the effect to your liking, as there are many methods. It also needs to be cured under the lamp.
Finally, you apply the gel top coat. This seals everything and makes it difficult to remove.
Y así queda de lindo el efecto ojo de gato.
And that's how beautiful the cat-eye effect looks.
Translated with https://www.deepl.com/translator