Hola , hola comunidad de #hive y de la comunidad #Diyhub deseo se encuentren todos bien, les envío un saludo desde mi pueblo Quebrada de Mono en el Estado Sucre, por acá nuevamente para compartir con ustedes una hermosa estrella y adornos de navidad en foami , ya que la navidad está muy cerca y estoy pensando en montar un árbol de navidad 🎄 acá en la casa de mi mamá y empecé a realizar los adornos ,y acá les voy a mostrar el paso a paso para realizarlos , espero visiten mi blog para que vean todo el proceso y también los realicen.
Hello, hello #hive community and the #Diyhub community I wish you all well, I send you greetings from my town Quebrada de Mono in Sucre State, here again to share with you a beautiful star and Christmas ornaments in foami , I'm thinking about setting up a Christmas tree 🎄 here in my mom's house and I started to make the ornaments, and here I will show you the step by step to make them, I hope you visit my blog to see the whole process and also make them.
Materiales a utilizar
❄️ Foami escarchado dorado.
❄️ Foami plateado.
❄️ Pistola de silicón.
❄️ Barra de silicón.
❄️ Tijeras.
❄️ Un molde de papel de 8x8 cm.
❄️ Un palillo para marcar en el foami.
Materials to use
❄️ Gold frosted Foami.
❄️ Silver foami.
❄️ Silicone gun.
❄️ Silicone stick.
❄️ Scissors.
❄️ One 8x8 cm paper mold.
❄️ A toothpick to mark on the foami.
Paso a paso
Comienzo marcando en el foami 4 cuadros de 8x8 cm los corto y luego marco la mitad de una esquina a otra y corto sacando en total 8 triángulos ,luego doblo por la parte lisa y realizo tres cortes (1 al 6).
Step by step
I start by marking on the foami 4 squares of 8x8 cm and then I cut them in half from one corner to the other and cut out a total of 8 triangles, then I fold the smooth side and make three cuts (1 to 6).
Luego de realizar los tres cortes, realizo un corte al final dejando una punta, luego empiezo a unir las puntas de dos de los tres cortes que hice por la parte lisa con el silicón caliente , dejando las dos últimas tiras sin pegar (7 al 12).
After making the three cuts, I make a cut at the end leaving a tip, then I begin to join the tips of two of the three cuts I made on the smooth side with the hot silicone, leaving the last two strips unglued (7 to 12).
Luego empiezo a unir cada una de las 5 piezas a utilizar en la parte de abajo de las dos tiras que no utilicé, repito ese proceso en todas las piezas, luego corto un círculo , coloco silicón caliente en las piezas pagadas y lo pego en el círculo , corto una pequeña tira de fieltro y lo coloco en la parte de atrás de una de las puntas , recorto un poco las puntas sobrante de las tiras (13 al 18).
Then I begin to join each of the 5 pieces to be used in the bottom of the two strips that I did not use, I repeat this process in all the pieces, then I cut a circle, put hot silicone on the paid pieces and glue it in the circle, cut a small strip of felt and place it in the back of one of the ends, I cut a little of the excess ends of the strips (13 to 18).
Luego con los otros tres triángulos que quedaron pego las dos tiras en la parte de arriba formando una pequeña v y pego la punta ahí, coloco una pequeña tira y hago tres bellos adornos y así doy por terminado este hermoso proyecto (19,20)
Then with the other three remaining triangles I glue the two strips at the top forming a small v and glue the tip there, place a small strip and make three beautiful ornaments and thus I finish this beautiful project (19,20).
Espero les guste este hermoso trabajo , gracias por visitar y comentar mi post , será hasta una próxima oportunidad.
I hope you like this beautiful work , thanks for visiting and commenting on my post , will be until next time.
Todas las fotos son de mi propiedad @Lupasbra21, fueron tomadas con mi teléfono inteligente Redmi note 9.
Utilicé la aplicación polish para la edición de fotos.
Utilicé el traductor Deepl translate.
All photos are my property @Lupasbra21, they were taken with my smartphone Redmi note 9.
I used polish app for photo editing.
I used the translator Deepl translate.