More practice on the Metal Cutting Machine! Still a lot to learn. Cutting Lion head is not exactly what I would like to be cutting with this machine. But this practice will get me good at what I do want to do on the machine.
A piece of metal costs a few dollars and this energy should not be wasted with this machine!
But it is cool just to cut some s***. This machine continues to surprise me. I'm a big fan of stencil art and stencil graffiti art. And have made a few stencils, it takes time and effort to do it well............ This metal cutting machine does make it easy in a lot of ways!
**But I failed cut on this machine is never a fine, sometimes when you're cutting the metal you draw a line. That's too fine and then that part melts away. You can easily ruin a piece, or there's something that you didn't plan for, an unexpected error. But you don't know what you don't know so that's why you practice!
This next photo is when this piece was done cutting on the machine. Sometimes the metal bits on the cuts are still attached, I dropped this piece flat but hard onto the ground. To break the slag off and to free the piece. We have a certain amount of water in our bed of the metal cutting machine. And when I drop the piece on the ground. And then pick the piece up, this image was revealed. The water left this image below ⤵️
But surprisingly, I don't have too many photos of the day here to share with you, I took more videos than stills! If you're reading this within the first couple minutes of when I posted this. You're probably missing the gif. files I have shared below here. I have problems loading gif on Actifit, so going to do it post peakd!
This report was published via Actifit app (Android | iOS). Check out the original version here on actifit.io
