Hola hivers, ayer me seleccionaron en el trabajo para analizar unas muestras de suelo de laterita, este es el resultado casi final, donde podemos ver ese color amarillo, que se debe al exceso de hierro que poseen las muestras.
Luego, con frasco lavador se enrasa el volumétrico grande, que se enrasa con agua y luego se agita, pasos importantes en un proceso químico analítico, ya que si se enrasa de manera incorrecta los valores finales pueden influir porque no es el volumen que debe tener.
Si quieren saber qué recomendaciones hay que seguir para enrasar perfecto, no duden en preguntar.
Luego, con una pipeta de 10 mL se extrae del volumétrico grande al chiquito de 25 mL, luego se enrasa con ácido clorhídrico; en este caso, se agita y, por último, se adiciona a los tubos de ensayo para leerlo en los equipos de medición.
Nota: Las fotos fueron tomadas por mí, a través de mi celular: Tecno Go Spark.
Nota: El texto fue traducido por Deepl traductor.
English:
Hi hivers, yesterday I was selected at work to analyze some laterite soil samples, and this is the almost final result, where we can see that yellow color, which is due to the excess of iron in the samples.
Then, with a washing flask, the large volumetric flask is filled, which is filled with water and then stirred, important steps in an analytical chemical process, since an incorrect filling can influence the final values because it is not the correct volume.
If you want to know what recommendations to follow for perfect filling, don't hesitate to ask.
Next, with a 10 mL pipette, it is extracted from the large volumetric flask to the small 25 mL one, then it is filled with hydrochloric acid; in this case, it is stirred and finally added to the test tubes to be read on the measuring equipment.
Note: The photos were taken by me, through my Tecno Go Spark cellphone.
Note: The text was translated by Deepl translator.