In this post, I have the tutorial for you guys in which I will tell you that how you can make or design admission guide in the adobe illustrator.
This design I used one of the coolest tools in the illustrator. You can use it anywhere because this technique is very good and save a lot of time as well. As you see that Illustrator provide you powerful tool to make an eye-catching design. Whenever you have any work regards printing Illustrator is the best on for that purpose and give you want you are looking for. Although you can also make these things in photoshop as well it's totally up to you that what you use to make the design. But the design makes in photoshop is pixelate not a vector. So for that purpose, I used the illustrator at the moment.
The first thing to design the admission guide for the institute is to know the exact sizes of it. So for that, I take 8.75 inches and 11.25 inches which means 8.75 inches width and 11.25 inches height. Now in that size, I take 0.125 inches bleed point from all dimensions. So the size of trimmer line now is 8.50 inches and 11 inches and the save zone box size is now 8.25 inches and 10.75 inches
In this previous tutorial, I have explained all the procedure step by step how I make the admission guide of the institute in adobe illustrator. Now I'm gonna design the guide which is used for the following functions that I have told you above in many articles.
This tutorial is on the demand of my students that they are facing issue while trying to make a magazine or admission guides for there practice so I made this simple and eye-catching design for them and for the desired technologies software where I worked as well and all the students also from their
Here is Admission guide front page of Adobe Illustrator
As you have seen in this design all the procedure is done with short and simple tricks that will surely gonna help you and save your times. Not only for admission guides you can make lots of book, covers, mazagine, album or anything that you want to design. But the fact is that you have to know about the final sizes of it. So for that purpose design sizes are very important. As you can see that all the measurements are what they have to be and design according to the trimmer line cutting and save zone box is also here is this design.
Ist Image!
In this image, there is an image in the background which is a loop or spiral of light which represent the knowledge which is an infinite and infinite loop which never ends or restricted and in the top information is written and in the bottom logo with the name of brand and tagline is written.
2nd Image!
This image represents the CEO message that they want to convey to others. This image is also designed according to the above dimensions. In this design there is an image of the CEO of the Desired Technology! and in the center, there is a message from the CEO and very simple and eye-catching design is made for it. in the back there is an image of the technologies to set the theme of the institute. All the design and color scheme is taken from logo color have look to the logo. So that purpose I choose the blue theme which represents the trust, confidence, loyal etc
3rd Image!
As you can see that this design is used to represent the introduction of the institution and in the background, the institution image is placed to make it cool. If you remember the previous tutorials of the series then you well known about this design how it to be created. So if you know that it will be great for you.
Note!
If you want further details about this you are most welcome I will provide you what you are looking for :)
Because I'm here at your services! O:)
As you can clearly see that these shapes are created while using the Shape builder, Pathfinder, and many other tools. Here I perform all because many people have not know about that so for that reason I used each and every tool step by step. I have used many tools their use it and also try to make as you can to become a good designer and create better designs for you and your customer as well.
Steps to do!
- First open the new page.
- Take any proper sizes.
- Take save zone box.
- Design inside the save zone.
- Always use the export for png.
- Now for png use artboard and range to take exact png.
- Don't design outside the artboard.
- Now your Shape is ready.
Remember!
Short key!
- For rectangle press "M"
- For circle press "L"
- For shape builder tool option press "shift+M"
- For Pathfinder press "shift+ctrl+f9"
- For clipping mask press "ctrl+7"
- For copy press "alt" and drag
- For a copy in place "ctrl+c and ctrl+f"
- For Save press "ctrl+S"
- For Save as press "shif+ctrl+S"
This lecture is delivered on steemit and youtube, you can ask any query or question in the Discord Channel of "Rainbow Warriors"
Here is the link to join this channel for any work or query regards anything that comes to your mind!
Hope you guys like this initiative of making the Adobe Illustrator tutorials for those who are unable to find jobs and not able to pay a fee or they are looking for some skills to build on for a long term.
Here is the link of my page like please and share it and like it with others
https://www.facebook.com/Graphics-Channel-151412682234319/
Here is the link of my youtube channel "Graphics Channel
https://www.youtube.com/channel/UCSQy1JJthJG3l0MI6RR4Rew/featured?view_as=subscriber
Please Like it share it and also subscribe it
I'm here to showcase my talent in front of you guys need your huge support and motivation. If you guys keep in touch with me and support my work. I surely gonna rock-on the steemit
Please share your valuable feedback about this post. So in future, I will make better as I can. Thanks for your precious time to reading this post
Regards: Aqib Ashiq
CEO of "Graphics Channel, Rainbow Warriors, Cross Technology"
Fiverr profile
https://www.fiverr.com/aqib_ashiq
Facebook Profile
https://www.facebook.com/aqib.ashiq.31
Upwork Profile
https://www.upwork.com/o/profiles/users/_~0169657518d328561e/