1. Before flying, first check whether the blade is firmly installed, whether the blade is damaged, the gimble buckle, whether the gimble cover is removed, and whether the remote control is fully charged.
2. Check if the battery is installed correctly and if it is tight.
3. It is recommended to calibrate the compass each time you change the flight location.
4. Are there any wires near the take-off location, whether there are tall buildings and birds, and whether there are any other hidden dangers that affect the safety of the aircraft.
5. Observe the ground wind and high-altitude cloud flow and high-altitude wind before taking off.
6. Observe the wind direction before pulling the drone at a long distance.
7. Adjust the remote control antenna to the optimal angle. The specific angle can refer to the specification.
8. Boot to see if your module is normal.
9. Check the battery voltage and charge.
10. Reasonably set the return point and return altitude.
11. Reasonably set whether the aircraft is hovering or returning after losing the connection. Please refer to the terrain and other factors for a reasonable setting.
12. Check the number of GPS satellites to see if they meet the flight standards. The number of GPS satellites that do not meet the standard will cause the aircraft to drift, that is, the attitude mode.
13. Check the status of the aircraft after the remote control assists take-off or automatic take-off, whether there is slight jitter or other abnormal states.
14. Observe the attitude ball in flight and the app warning!
15. Try to avoid hidden dangers during flight, surround flight, follow mode and other intelligent flight modes, be sure to carefully observe the surrounding environment!
16. The remote control is disconnected from the mobile phone during flight. Please check if the data cable interface is loose.
17. The aircraft is disconnected from the remote control during flight. Please check if the antenna angle is correct!
18. After using smart return to reach the visual range, it is recommended to manually take over for manual return.
19. After the drone descends, check if the aircraft is damaged and if the blades and batteries are loose and damaged!
20. If the drone takes off again, be sure to check if all the modules affecting the flight are normal and can continue to fly!
21. Close all software running in the mobile phone before a flight, reserve enough storage space for DJI go app to ensure the normal flight of the drone
22. The remote control is disconnected from the aircraft during flight, and the angle cannot be connected multiple times. You can have a try to restart the remote control.
23. When the drone is flying close to the water, it is recommended to turn off the downsight positioning!
24. Perform emergency braking in high-speed flight and hit the reverse rudder! Fill up the throttle to increase the braking distance.
25. Intelligent return to the visual range is recommended to manually take over.
26. After the flight, the battery is recommended to be cooled before charging.
27. Hoping everyone can achieve civilized flight, quality flight, happy flight, avoid flying drones in crowded places, and not affecting public safety places.