So I got some of the materials gathered for the build of a breeder Aquaponics system in the trailer. This system will be based off one that my good buddy 
I started by cutting the top 5 inches of this mobile shelving from uline with an plug in electric reciprocal saw with a metal cutting blade.
I needed to do this so there would be enough clearance for easily moving the shelves in an out of the trailer.
After I made the cuts I found that one of my plastic caps was missing for the support poles. However there just so happened to be a beer bottle cap laying around that is the perfect size to use as a cap :)
I am planning to position the system over the axles over the trailer as the totes you see will be filled with water. I will push the system to the front when parked to allow some space for my cot. I intend on sleeping and living out of this trailer initially before I get an awning built to protect and older pop up camper with roof degradation from rain damage.
Thank you for your time if you checked out this post!
