.
The first variant.
Turn the hair dryer and high-power hot air stream is heated dent. Next, you need compressed air or carbon dioxide cartridges which are sold in computer stores. Pre-spray shaken, then direct a jet of compressed air to the dent.
Aerosol spray, so that it covers the damaged area with a margin of three centimeters in each direction. The problem - rapidly cool dent. The procedure lasts for 15 - 20 seconds - it is not frost is formed. In the process of melting frost dimple is aligned all the way! Smooth place polish with a soft cloth to shine and enjoy the result. Only one warning: in rare cases, the site of the former dents broken paint.
Option two
Dent removed mechanically. This method is effective only if the dye is not damaged. Produced partial dismantling of the machine and then squeezed dent from the inside by hand or with the help of tools. You can align the damage a powerful suction cup that is suspended to the female area and the "pull" of her.
A similar process - to glue anything to dent special glue, and then pulled up. If not at hand a special glue, suitable rubber or silicone. After leveling the surface of the adhesive is removed from it without problems.
