[Mining Rig Build and 6 card Hash Rate] GTX 1070 Gigabyte G1 Gaming 8GB

I recently built an aluminum open air mining rig frame with a thick piece of Plexiglass with brass standoffs for mounting the motherboard.

Here you can see the Plexiglass I used in order to install the brass motherboard standoffs to ensure a proper motherboard mounting.

Reusing an old six card socket 1150 mining motherboard that is still going strong.

Everything seems to line up nicely

This can easily support 6 cards, I may add some fans in the rear of the rig eventually just to help increase the lifespan of the GPU fans.

The frame is held together with rivets

I will be using two 750 watt platinum power supplies each placed on the Plexiglass directly behind the motherboard.

Eth 30 mh/s 180 mh/s full rig
Power Limit 100
Graphics clock offset -200
Memory +900

Zcash 410-430 sols/s 2,500+ for full rig
Power Limit 100
Graphics clock offset +100
Memory +600

Ideally this would be best with a single 1200 watt or 1600 watt power supply with a 1200 watt power supply being ideal if you keep the power limit at 100 or below for all your cards and keeping power at the wall around 600+ watts.

Thanks for checking this out and feel free to ask questions or comment below.