A review and test of the latest Scarlett 2i2.
Tested on Linux and Windows with a microphone, guitar, and synthesizer.
The 2i2 is a device sometimes called a "soundcard",interface, or even a board. It's technically called a DAC/ADC or digital-to-analogue device, and it's purpose is to connect a digital device such as your computer or phone to audio devices like guitars or microphones.
New Features:
The Gen 4's major new feature is it's built-in DSP or digital signal processor. A DSP is a digital circuit for manipulating audio/video signals.
This new DSP adds:
- Auto-Tune: Option that listens to your voice/instrument, and automatically sets the level. It can also be used on both inputs and set them together for decent levels.
- Safe-Mode: Looks for high frequency/volume, and attempt to prevent clipping automatically.
- 5-volt DC Power: Allows the 2i2 to work with phones/tablets because they don't provide enough output power over USB.
Improvements:
Higher dynamic range and cleaner audio for both the pre-amps and the headphone amplifier.
- Air-Mode: Scarlett's signature feature that adds presence & gain to the input signal to achieve the sound of the classic Focusrite console pre-amps.
- Improved direct-monitoring
- Built-in Loopback for mixing/recording audio from the computer with the inputs. Ideal for live-streaming or podcasting.
What does 2i2 mean?
It's called a 2i2 because it has 2 inputs, and 2 outputs.
It can record via two channels each contain an XLR or 1/4" inch receiver.
It has both, balanced left/right 1/4" outputs for studio monitors, and a single output for headphones.