Hi the steemit. Today I will give you some tips on modification of jupiter z motorcycle engine. Probably among the steemit there who like racing. Okay go.
The first way you can do is to change the size of Jupiter Z standard piston size 49 mm by using a piston measuring 52 mm for engine capacity increased to 114.7cc.
Next, you can change the dome of the pistone by using a 45 degree slope to make it more fitting again, do not forget to dip the valve so that the inner part to 0.5 mm to 1 mm.
Then, for the exhaust portion and also the intake hole, you can enlarge the inner hole by 20 mm in size, while for the outer hole it can use 19 mm in size. Then, puree the exhaust holes until smooth and slippery to the exhaust gas on Jupiter Z motorcycle more smoothly.
In the space contained in the carburetor, you can use the type of karbu Suzuki Shogun SP motor as well as with the addition of Intake as its manifold.
Tap into the ignition system, so bore up your Jupiter Z bike the better you can use spark plugs, coils and racing CDI, to produce a coil that the maximum.
As for the roar of ignition, you can arrangement of noken as using part noken as racing. It aims to change the part of noken as not too much and do not change to the original parts. Because, in addition to not changing the manufacturer's standard, the racing noken as well in the sense of having the shape and size are very fitting.
Well, for the location of the valve, you can change or replace by increasing the size of the valve using 27 mm space Intake and Exhaust measuring 23 mm. Furthermore, in order for the compression of your Jupiter Z motor to increase and become better again, you can adjust to the shape of the piston or you can also breathe on the head of the cylinder with a size of approximately 0.5 mm.
Okay the steemit is enough here first my writing about the jupiter machine mods z. meet in the next article. Follow me. Thank you