While I was showing components of the Jetbot, I was asked whether I would put them together, the answer was "YES". So now I am going to show the steps of assembling this little so called "Robot". I think it is more like a car than a robot.
在過去的一段時間中, 當我仍是每天的在展示這車的部件時, 有位大哥大問我會否把車組裝起來. 這個當然是會啦. 現在就開始示範如何組裝這車.
There are 2 supporting wheels as shown. Install the supporting wheels on the base plate by removing the screws on them, use those screws to fix the supporting wheels.
車身有兩組輔助輪，要利用輪上原來的螺絲作固定用途。小心的把輔助輪上的螺絲拆下，再將輔助輪用螺絲安裝在車的底盤板上。
Install the base plate on Jetbot using these 4 screws:
再用這四顆螺絲把底盤板安裝在車上:
Then install 2 main wheels.
再將兩個主輪胎裝到車上。
