HOW TO AVOID SHAKY SHOTS WHEN HANDLING THE CAMERA

One of the common problems that many new digital (and film) photographers do have is ‘camera shake’ where images seem blurry – usually because the camera was not held still enough while the shutter was depressed. This is especially common in shots taken in low light situations where the shutter is open for longer periods of time. Even the smallest movement of the camera can cause it and the only real way to eliminate it is with a tripod.
Adding to camera shake is a technique that is increasingly common with digital camera users of holding the camera at arm’s length away from them as they take shots. While this might be a good way to frame your shot the further away from your body, you hold a camera the more chance you have of swaying or shaking as you take your shot.
How to Hold a Camera
Tripods are the best way to stop camera shake because they have three sturdy legs that keep things very still – but if you don’t have one then another simple way to enhance the stability of the camera is to hold onto it with two hands.
While it can be tempting to shoot one handed a two hands will increase your stillness.
How you grip your camera will depend upon what type of digital camera you are using and varies from person to person depending upon preference. There is no real right or wrong way to do it but here’s the technique that I generally use:

Use your right hand to grip the right hand end of the camera. Your forefinger should sit lightly above the shutter release, your other three fingers curling around the front of the camera. Your right thumb grips onto the back of the camera. Most cameras these days have some sort of grip and even impressions for where fingers should go so this should feel natural. Use a strong grip with your right hand but don’t grip it so tightly that you end up shaking the camera.


The position of your left hand will depend upon your camera but in in general it should support the weight of the camera and will either sit underneath the camera or under/around a lens if you have a DSLR.


If you’re shooting using the view finder to line up your shot you’ll have the camera nice and close into your body which will add extra stability but if you’re using the LCD make sure you don’t hold your camera too far away from your body. Tuck your elbows into your sides and lean the camera out a little from your face. Alternatively use the viewfinder if it’s not too small or difficult to see through, this becomes a major problem.


Add extra stability by leaning against a solid object like a wall or a tree or by sitting or kneeling down. If you have to stand and don’t have anything to lean on for extra support put your feet shoulder width apart to give yourself a steady stance. The stiller you can keep your body the stiller the camera will be.

Holding a camera in this way will allow you flexibility of being able to line up shots quickly but will also help you to hold still for the crucial moment of your shutter being open.
Another quick bonus tip on how to hold a camera – before you take a shot take a gentle but deep breath, hold it, then take the shot and exhale. The other method people use is the exact opposite – exhale and before inhaling again take the shot. It’s amazing how much a body rises and falls simply by breathing – being conscious of it can give you an edge.
Each person may have their own little techniques that they are more comfortable with and ultimately you need to find what works best for you.
One last note on how to hold a camera – this post is about ‘holding a camera’ in a way that will help you get rid of camera shake. It’s not rocket science – but it’s amazing how many people get it wrong and wonder why their images are blurry.
There are of course many other techniques for decreasing camera shake that should be used in line with the way you hold it. Shutter speed, lenses with image stabilization and of course tripods can all help achieve image stability