If you have successfully hacked a PLDTHOMEDSL or PLDTMyDSL Wi-Fi using the steps from my previous blog (https://steemit.com/pldthomedsl/@dennevhyn31/ph-pldthomedsl-pldtmydsl-manual-wi-fi-password-hack-tutorial), you should immediately create a hidden virtual Wi-Fi access point. This will allow you to connect to the hacked Wi-Fi even if the owner changes the password at any point in time. Just follow the step-by-step procedures below.
STEP 1: Go to http://192.168.1.1 to access the router admin page. Username is adminpldt and password is 1234567890. That’s the default PLDT router login username and password. Just click Login to enter router page.
STEP 2: Click Setup on the main menu bar on top. Then click on WLAN>MBSSID on the sub-menu at the left side of the page.
STEP 3: Select any VAP or Virtual Access Point.
- SSID: (Any name you prefer)
- Broadcast SSID: Disable
- Authentication Type: Open System or you can select Shared Key. Just make sure to take note of the password you will set.
Click Apply Changes then wait for the router to reboot.
STEP 4: Once it finishes restarting, open your WiFi Manager and connect to the Virtual Wi-Fi you created. In this example, I will be connecting to PLDTHOMEDSL_3 because that’s the one I created from the previous step. It will ask a password if you have set a shared key.
If you are you going to use the built-in Wi-Fi client, you have to manually add the network. The WiFi Manager app shows hidden wireless networks.
By successfully following the aforementioned steps, you should be able to connect successfully to the virtual Wi-Fi network you created. This is going to be hidden to others unless they have a Wi-Fi app like WiFi Manager that displays hidden wireless networks. So I would suggest that you create a hidden VAP with a Shared Key so that you are the only one who can be able to connect to it.
Anyway, enjoy using your neighbor’s Wi-Fi. LOL! Thanks for visiting my blog and have a good day!
© Cid Sawyer