Hola a todos, Feliz tarde, el día de hoy les quiero compartir un pequeño y lindo detalle que elabore para una tía muy querida en esta época decembrina.
En esta ocasión le quise obsequiar unas lindas argollas que sé que a ella le encanta este tipo de prendas...
Hello everyone, Happy afternoon, today I want to share a small and nice detail that I made for a very dear aunt in this December season. This time I wanted to give her some pretty earrings that I know she loves this type of garment...
El mismo lo elabore creando una corona la cual representa la Esperanza de que todo el año reine Salud en su hogar.
les muestro como lo Elabore...
- Carton Reciclado.
- Cinta Roja.
- Pabilo color Amarillo.
- Foami color Verde.
- Foami Escarchado Verde.
- Exacto
- Pistola de Silicon.
- Silicon de barra.
- Tijera.
- Regla.
- Perforadora.
- Lapiz.
- Recycled Cardboard.
- Red Ribbon.
- Yellow wick.
- Green foam.
- Green Frosted Foami.
- Exactly
- Silicon gun.
- Silicon bar.
- Scissors.
- Rule.
- Punch.
- Pencil.
PASO 1:
En el cartón reciclado dibuje una plantilla o Base con las medidas de 8cm de ancho por 11,5cm de alto, una vez dibujado procedí a cortar la pieza.
STEP 1: On the recycled cardboard I drew a template or Base with the measurements of 8cm wide by 11.5cm high, once drawn I proceeded to cut the piece.
PASO 2:
Ya teniendo la pieza cortada, dibuje un circulo en el centro de la misma, así como también corte los foamis en forma de pequeñas hojas, la verdad disfrute mucho al cortarlas es una terapia anti estrés jejejeje...
STEP 2: Having already cut the piece, I drew a circle in the center of it, as well as cut the foamis in the shape of small leaves, the truth is that I really enjoyed cutting them, it's an anti-stress therapy hehehehe...
PASO 3:
Una vez que tuve todas mis hojitas cortadas, comencé a pegarlas al rededor del circulo ya antes dibujado en mi pieza (plantilla) intercalándolas: (hoja escarchada, hoja no escarchada) sin seguir un patrón en especifico la idea fue entrecruzarlas y hacer que se vea semejante a una corona real..
STEP 3: Once I had all my leaves cut out, I began to glue them around the circle already drawn on my piece (template) interspersing them: (frosted leaf, non-frosted leaf) without following a specific pattern. The idea was to intersect them and make it look similar to a royal crown
PASO 4:
Con el uso del Exacto corte una abertura y a su vez abrí dos agujeros pequeños con una aguja gruesa para poder así colgar las argollas.
STEP 4: With the use of the Exacto I cut an opening and at the same time I opened two small holes with a thick needle to be able to hang the rings.
PASO 5:
seguidamente corte la cinta Roja a unos 17cm y forme con ella un lazo pequeño el cual pegue en mi corona ya elaborada, escribí Feliz Navidad en la parte baja de la misma.
STEP 5: then cut the Red ribbon to about 17cm and form a small bow with it which I glued to my already made crown, I wrote Merry Christmas on the bottom of it.
PASO 6:
Ya finalizando, elabore con el pabilo un pequeño pompom con una tira larga para colgar.
STEP 6: Once finished, make a small pompom with the wick with a long strap to hang.
Ya culminado todo el proceso, colgué las argollas en mi detalle y así quedo...
Once the whole process was completed, I hung the rings on my detail and that's how it looks...
Gracias por Leerme!
Espero les guste mi creación
Las Fotos son de mi Autoria
Un gran Abrazo...
Thanks for reading me!
I hope you like my creation
The Photos are my Authorship
A big hug...