Feliz inicio de semana queridos amigos, espero se encuentren llenos de mucha salud.
Happy start to the week dear friends, I hope you are full of good health.
Les traigo está hermosa artesanía y espero sea de su agrado. Desde hace día venía con ganas de hacer un animalito en bisutería, pero que se viera como en tercera dimensión o muy real.
I bring you this beautiful craft and I hope you like it. For days I have been wanting to make a little animal in costume jewelry, but one that would look like it was in the third dimension or very real.
Y bueno pensando y buscando uno que no fuera muy difícil de realizar, por lo que las arañas me resultaron fácil y rápidas de hacer. Solo que se me complicó un poco ya que no tengo las pinzas o herramientas adecuadas para hacer este tipo de manualidades al trabajar los amarres... así que usando lo que tenía a la mano pudo resolver, aunque las terminaciones no quedaron como quería.
And well, thinking and looking for one that wasn't very difficult to make, so the spiders were easy and quick for me to make. It was just a little complicated for me since I don't have the appropriate tweezers or tools to do this type of craft when working on the ties... so using what I had on hand I was able to solve it, although the finishes weren't the way I wanted.
Pero una vez que hice la primera y ver el resultado, empecé a revisar todo el material de bisuterías en busca de hacer al menos unas tres arañas. Y que al usar cuentas diferentes iban a tomar por ende formas distintas. Y lo colores las hacen ver tan linda que no solo a mi me encantaron mis arácnidos si no a mí nieto que ya me dijo que se las diera para el jugar con su muñeco del hombre araña 🕷️.
But once I made the first one and saw the result, I started going through all the jewelry material looking to make at least three spiders. And that by using different accounts they would therefore take different forms. And the colors make them look so cute that not only did I love my arachnids but also my grandson who already told me to give them to him to play with his Spider-Man doll 🕷️.
El seleccionar los canutillos ( utilizados para las patas de la araña ) en verdad requirió de mucha paciencia, porque tuve que ir con una aguja seleccionando ya que los tenía desorganizados en colores y tamaños en un envase. Por lo que creo que me llevo más tiempo eso que hacer en si la araña.
Selecting the beads (used for the spider's legs) really required a lot of patience, because I had to go with a needle selecting since I had them disorganized in colors and sizes in a container. So I think that took me more time than doing the spider itself.
Materiales que utilice:
🕸️ Alambre reciclado de cables eléctricos, en dos grosor diferentes.
🕸️ Canutillos negro y mostacillas tornasol.
🕸️ dos cuentas negras para formar el tronco, una más grande que la otra.
🕸️ corta uñas.
Materials used:
🕸️ Recycled wire from electrical cables, in two different thicknesses.
🕸️ Black eclairs and iridescent beads.
🕸️ two black beads to form the trunk, one larger than the other.
🕸️ nail cutter.
🕷️ Procedimiento 🕷️
🕷️ Procedure 🕷️
- Paso # 01.
Para la base o cuerpo de la araña, corte un pedazo de alambre de una a 15 centímetros coloque una mostacilla en el centro y lo doble.
Luego Introduje la cuenta más grande que seria el abdomen ( el cuerpo está dividido en dos secciones: el cefalotorax y el abdomen) y lo demás: patas, ojos y boca forman parte del cefalotorax.
Después tomo un alambre más largo y lo doblo varias veces hasta que queden cuatro partes de alambres en cada extremo., Ajustándolo bien al alambre base.
- Step #01.
For the base or body of the spider, cut a piece of wire from one to 15 centimeters, place a bead in the center and fold it.
Then I introduced the largest bead, which would be the abdomen (the body is divided into two sections: the cephalothorax and the abdomen) and the rest: legs, eyes and mouth are part of the cephalothorax.
Then I take a longer wire and bend it several times until there are four pieces of wire at each end, adjusting it tightly to the base wire.
- Paso # 02.
Abrí las patas y empecé a colocar los canutillos negros y entre ellos mostacillas tornasol...colocando más Canutillos en las primeras patas, las que estan cerca del abdomen ya que están son un poco más larga que las otras.
- Step #02.
I opened the legs and began to place the black beads and among them litmus beads...placing more Beads on the first legs, the ones close to the abdomen since they are a little longer than the others.
Y al llegar a la punta de cada pata para asegurar los canutillos le doy varias vueltas con el alambre. ( Esto se me dificulto un poco ya que no tenía la pinza adecuada), pero al final quedó bien.
Lista las pastas introduje la otra cuenta y la ajuste bien cerca de las patas...y Con el alambre que quedó hice un pequeño aro y le di varias vueltas.
And when I reach the tip of each leg to secure the beads, I turn the wire several times. (This was a little difficult for me since I didn't have the right clamp), but in the end it turned out well.
Once the pasta was ready, I introduced the other bead and adjusted it close to the legs...and with the remaining wire I made a small ring and turned it several times.
Cortando los sobrantes de alambres. Use el mismo procedimiento para las otra arañas, usando cuentas de otro color y forma... quedando diferentes.
Cutting the excess wires. Use the same procedure for the other spiders, using beads of a different color and shape... leaving them different.
El Resultado final..!!!
The final result..!!!
Gracias por visitar mi blog...Dios te bendiga...!!
Thank you for visiting my blog...God bless you...!!