Hola queridos amigos.
Feliz y bendecida tarde!
Así que te mostraré y nombraré los materiales:
| Retazos de tela | Algodón de relleno |
|---|---|
| Hilos | Agujas y alfileres |
| Tijera | Lápices |
| Perlitas negras (2) | Dibujo o molde |
Comencemos:
- Paso 1:
- Recorta el molde y marca tres (3) piezas, usa un lápiz de color para marcar todo el borde sobre la tela negra.
- Luego marca y recorta el centro de la cara en una de las piezas y fija sobre tela blanca con alfileres.
- Ahora comienza a coser con punto atrás, hilvanando o haciendo puntadas seguidas por toda la orilla tratando de que quede lisa la tela blanca, tu escoges la forma más fácil de costura.
- Retira luego los alfileres y recorta dejando 1 ó 2 milímetros de borde.
. Paso 2:
- Ahora dobla por la mitad todas las piezas y comienza a coser uniendo mitades como te indico en la foto anterior y cuando estés cosiendo la tercera pieza, deja 1 1/2 cm sin costura para voltear con la ayuda de un lápiz o palito y comienza a rellenar con el algodón.
- Recorta y cose un triángulo en tela naranja, voltea y cose (ver foto)
- Luego inserta la aguja con hilo negro y comienza a coser las perlitas (ojos) pasando 2 o 3 veces dentro de la perla para que queden bien apretaditas.
- Y cierra cosiendo la abertura.
Paso 3:
Recorta la paticas en forma ovoide (4) piezas, cose con punto ojal y deja a un lado una pequeña abertura para voltear y rellenar.
Luego remata y cierra las aberturas y cose en la parte de abajo del cuerpo.
Así va quedando! ya falta poco!Aparte recorta la cola, cose, voltea y pega en la parte de atrás.
Paso 4:
Debe quedar así la colita.
Luego recorta y cose las alitas a los lados del cuerpo, justo a la altura de los ojos.
Ahora pinta las mejillas con un poco de tiza.
Por último haz un lazo y cose en la parte de arriba de la cabeza y listo... Así queda terminada esta Pequeña y Hermosa Pinguinita.
Si deseas, puedes montar en una base de mdf.
Fuente guía:
https://www.pinterest.es/pin/23010648079548138/
https://www.pinterest.es/pin/317292736252382894/
Nota: Fuí realizando las piezas pequeñas una a una ya que no tenía molde, me guié por la imagen del dibujo. (fuente)
Mi publicación está traducida con DeepL, editada con etiquetas HTML y las fotos capturadas con mi Blu G5 y editadas con Pic Collage.
Ahora me despido deseando te sea útil y te guste mi tutorial y de ser así me encantará ver tu comentario.
Muchas gracias por leerme y por tu visita.
Saludos.
English:
Hello dear friends.
Happy and blessed afternoon!
So I'll show you and name the materials: !
| Fabric scraps | Cotton for stuffing |
|---|---|
| Threads | Needles and pins |
| Scissors | Pencils |
| Black beads (2) | Drawing or mold |
Let's start:
- Step 1:
- Cut out the mold and mark three (3) pieces, use a colored pencil to mark the entire edge on the black fabric.
- Then mark and cut out the center of the face on one of the pieces and pin on white fabric.
- Now start stitching with back stitch, basting or running stitches all around the edge trying to make it smooth on the white fabric, you choose the easiest way to stitch.
- Then remove the pins and trim leaving 1 or 2 millimeters of border.
- Step 2:
- Now fold in half all the pieces and start sewing by joining halves as indicated in the previous photo and when you are sewing the third piece, leave 1 1/2 cm seamless to turn over with the help of a pencil or stick and start stuffing with the cotton.
- Cut out and sew a triangle in orange fabric, turn over and sew (see photo).
- Then insert the needle with black thread and start sewing the beads (eyes) passing 2 or 3 times inside the bead so that they are very tight.
- And close by sewing the opening.
Step 3:
Cut out the egg-shaped cowls (4) pieces, sew with buttonhole stitch and leave aside a small opening for turning and stuffing.
Then finish off and close the openings and sew on the bottom of the body.
That's how it's going to look!Cut out the tail, sew, turn over and glue on the back.
Step 4:
The tail should look like this.
Then cut out and sew the wings on the sides of the body, just at the level of the eyes.
Now paint the cheeks with some chalk.
Finally, make a bow and sew it on the top of the head and that's it... This is how this beautiful little penguin is finished.
If you wish, you can mount it on a mdf base.
Guidance source:
https://www.pinterest.es/pin/23010648079548138/
https://www.pinterest.es/pin/317292736252382894/
Note: I was making the small pieces one by one since I had no mold, I was guided by the image of the drawing. (source)
My publication is translated with DeepL, edited with HTML tags and the photos captured with my Blu G5 and edited with Pic Collage.
Now I say goodbye wishing you to be useful and like my tutorial and if so I will love to see your comment.
Thank you very much for reading and for your visit.
Greetings.