How to Repair a Strike Car
If you are on the highway or highway and suddenly your car breaks down, then the first step to do is not panic. Stay calm and start to push your car to the side or shoulder of the road, so as not to interfere with other vehicles that want to pass. The next dial from the wikihow.com, there are several ways to fix a strike car that you can apply, namely:
1.* Check Starter and Battery
The problem that often occurs when the car breaks down and does not want to ignite is because the battery is dead. When turning on the starter engine, try to listen to the engine sound. If the engine sound is not heard at all, then most likely the cause is due to a dead battery. If the sound heard is a "click" sound, the cause may be because the starter does not have enough power to turn on.
The effort that can be done to overcome a dead battery is to check the battery connection or battery terminal . The trick is to open the hood and check the battery connection with the engine. There are two connections, positive and negative. In order for both of them to conduct electricity properly, the metal in both connections must be clean from dust or rust. Cleaning it with a toothbrush can help remove dust and rust that sticks.
2.* Ensure the Fuel of the Car Is Fully Filled
Fuel that is almost exhausted or even completely exhausted can also cause the car to crash. The solution is to refuel your car at the nearest gas station. If you feel the car is running stumbling even though the gas has been stepped on at a constant speed, then you should be aware that the fuel of the car will soon run out. This is also a sign of car fuel that is not properly channeled.
Fuel deposits can also be the cause of the car not being turned on. If there is a deposit of fuel deposits on a fuel filter or fuel filter, it is likely that the fuel path will be hampered and cannot reach the combustion site. The solution is to silence your car for 20 minutes, to remove deposits that clog the fuel filter. But if the filter is also still covered by thick deposits, the only solution is to replace the old one with a new one.
3.* Checking the Combustion System
Knowing whether or not there is a problem with the combustion system can help determine the cause of the car to strike. The trick is to check and observe the spark plug of the strike car. If the color is gray, then there is no problem with the spark plug. If it is black, it means too much fuel entering the engine. If the spark plug burns or even melts, it indicates that the engine is overheated or overheated .
The way that can be done to overcome this is to replace the spark plug that burned or melted with a new one. Checking the spark plug wires also needs to be done. This is to ensure that the spark plug cable can supply electricity properly.
That's the way to fix a strike car that you need to know about a car driver. Broken cars are indeed a problem that often freaks car drivers. The best way to deal with a strike car is actually to be taken to the garage so that it can be repaired by experts. But if you are in the middle of a highway or toll road that is far from the car repair area, the methods described above are worth trying.
The first step is to check the car starter and the battery. Whether the battery is still there or not and the connection can conduct electricity properly or not. Then check the car fuel. If it runs out, it will certainly make the car go on strike. Finally check the combustion system by checking the spark plugs of the car. If the spark plug is on fire or even melts, replace it with a new one. Also remember to always carry tooling tools and guidebooks in your car. This will be very helpful in dealing with strike cars. Especially if you are still unfamiliar with the problem of a strike car.