Primer paso: || First step:
▪️ El rectángulo inicial debe medir unos 11 cm de ancho y 4 cm de alto, de estar hecho en el foami amarillo, este será el cuerpo del lápiz.
The initial rectangle should measure about 11 cm wide and 4 cm high, if it is made in yellow foami, this will be the body of the pencil.
Segundo paso: || Second step:
▪️ Tomando como referencia el ancho de la anterior figura, tracé un triángulo que será la punta del lápiz, esto en color beige.
Taking as a reference the width of the previous figure, I traced a triangle that will be the tip of the pencil, this in beige color.
Tercer paso: || Third step:
▪️ Con la misma medida de ancho anterior tracé y recorté un rectángulo pequeño en color dorado.
With the same width as before, I traced and cut out a small rectangle in gold.
Cuarto paso: || Fourth step:
▪️ Para culminar con las piezas del lápiz recorté la goma de borrar en color rojo, y considerando las medidas del lápiz.
To finish with the pencil pieces, I cut out the eraser in red, taking into account the pencil measurements.
Quinto paso: || Fifth step:
▪️ Todas piezas las uní usando silicón líquido, también coloqué el lápiz sobre el foami negro y tracé un contorno, recorté y pegué el lápiz al contorno, como verán también agregué una punta negra al lápiz, y formas irregulares para dar más realismo.
All pieces were joined together using liquid silicone, I also placed the pencil on the black foami and traced an outline, cut out and glued the pencil to the outline, as you will see I also added a black tip to the pencil, and irregular shapes to give more realism.
Sexto paso: || Sixth step:
▪️ Este paso es opcional, esta base es funcional como esta pero si desean agregar un toque tierno al separador pueden pintar una carita, en mi caso la hice usando foami y pintura blanca.
This step is optional, this base is functional as is but if you want to add a tender touch to the divider you can paint a little face, in my case I did it using foami and white paint.
Séptimo paso: || Seventh step:
▪️ Para finalizar con la creación deben pegar en la parte trasera un trozo de cordel blanco, esto hará que el separador cumpla su función. Es decir, deben colocar el lápiz en la hoja que deseen recordar, en la parte trasera atarán el cordel sutilmente, de esa manera podrán recordar en que parte quedaron de su lectura.
To finish with the creation, a piece of white string should be glued on the back, this will make the separator fulfill its function. That is to say, they should place the pencil on the page they want to remember, and then tie the string subtly on the back, so they will be able to remember where they left off in their reading.
Imágenes tomadas desde mi Alcatel One Touch Idol 4. || Images taken from my Alcatel One Touch Idol 4.
Separadores hechos en PhotoScape. || Dividers made in PhotoScape.
Ediciones hechas en Photoscape. || Editions made in Photoscape.
Translator Deepl.