Making A DIY Leather Shoes

Greetings members of the DIY Hub family.

I want to share today's handicraft with you. Though I started it yesterday, I finished today. I made two shoes.

Final results

Materials

1. Scissors

2. Gum

3. Mallet

4. Leather materials

5. Sole/ gum brush

6. Pen

7. Sewing machine / Fancy

Procedures

1. Drawing of the pattern.

1. Binding/ trimming of the pattern

1. I poured gum on the drawing, I used a gum brush to make sure it reached everywhere before I attached the pattern.

1. After attaching them to the drawing, I used a mallet to make them stick very fast.

1. I immediately cut them out again.

1. The next thing I did was to sew the pattern I just finished cutting.

1. Immediately after I finished sewing, I cut two pieces of leather, and I sewed them as well.

1. Drawing, cutting of the fibre, pouring of gum, attaching to the pattern.

1. I used a mallet to make them stick to the drawing before cutting them out.

1. Then I fixed the fibre to the las before nailing it.

1. I put the las inside the shoe so it makes the shoe straight after making the back side of it. After that, I fixed the fancy on the shoe. Guess what! I got what I needed before proceeding to the other shoe.

Thanks.