Saludos amigos de hive un abrazo a todas esas hermosas abejitas creativas de la plataforma y especialmente a las de la comunidad de #hivediy el día de hoy regreso por acá para traerles un tutorial de un hermoso detalle para regalar, especialmente para esas mamis tan bellas y especiales.
Greetings friends of hive a hug to all those beautiful creative bees of the platform and especially to those of the community of #hivediy today I return here to bring you a tutorial of a beautiful detail to give, especially for those beautiful and special mums.
Se acerca el día de las madres aquí en Venezuela, por lo que en estos días vamos a dedicarlos a realizar algunos detalles que podemos obsequiar a esté ser tan maravillosos, serán regalos y detallitos de fácil elaboración, mucho de ellos serían con materiales de reciclaje para demostrar todo el amor que sentimos por este ser ya se estarán elaborado con nuestras propias manos.
Mothers day is coming up here in Venezuela, so these days we are going to dedicate them to make some details that we can give to this wonderful being, they will be gifts and details of easy elaboration, many of them would be with recycling materials to show all the love we feel for this being and they will be made with our own hands.
Hoy vamos a realizar un hermoso joyero en tonos fucsia y con decoración de hermosos girasoles, sera salgo que podemos hacer de manera fácil, un detalle muy bonito que podemos obsequiar tanto a las mamis como algún otro ser especial en nuestras vidas al que queramos darle algún detalle.
Today we are going to make a beautiful jewellery box in fuchsia tones and decorated with beautiful sunflowers, it will be something that we can make easily, a very nice detail that we can give to mums or any other special person in our lives to whom we want to give a detail.
Para esto vamos a utilizar:
For this we will use:
🌻MATERIALES//MATERIALS🌻
🌻 Cartulina escarchada fucsia.
🌻 Foami escarchado marrón.
🌻 Foami escarchado amarillo.
🌻 Foami escarchado verde.
🌻 Silicón líquido.
🌻 Tijeras.
🌻 Regla.
🌻 Marcador.
🌻PASO A PASO // STEP BY STEP🌻
🌻PASO 1 // STEP 1🌻
En la cartulina escarchada fucsia marque un rectángulo de unos 32 cm de largo y de ancho 15 cm, a este rectángulo le marque dos pestañas uno en la parte de arriba de unos 2 cm y uno a los lados de 1 cm, para esto nos ayudamos con la regla y el marcador.
On the fuchsia frosted cardboard mark a rectangle of about 32 cm long and 15 cm wide, mark two tabs on this rectangle, one on the top of about 2 cm and one on the sides of 1 cm, for this we help ourselves with the ruler and the marker.
Luego de marcar vamos a tomar unas tijeras y recortamos.
After marking, we will take a pair of scissors and cut it out.
🌻PASO 2 // STEP 2🌻
Seguidamente con la regla y el marcador dibuje en la cartulina escarchada fucsia un círculo que vendrá hacer la tapa de nuestro joyero, también dibuje una tira de 32 cm de largo y de 2 cm de ancho, al terminar de marcar con las tijeras la recorte.
Then, using the ruler and the marker, draw a circle on the fuchsia frosted cardboard, which will become the lid of our jewellery box. Also draw a strip 32 cm long and 2 cm wide, and cut it out with the scissors when you have finished marking it.
También recorte una base que sera donde colocaremos nuestro joyero,será de unos 20 cm de largo por 15 cm de ancho, en la orilla le hice unos pequeños adornos recordándolo en forma circular.
I also cut out a base which will be where we will place our jewellery box, it will be about 20 cm long and 15 cm wide, on the edge I made some small ornaments remembering it in a circular shape.
🌻 PASO 3 y 4 // STEP 3 AND STEP 4 🌻
En este paso Vamos a comenzar a armar nuestro joyero la pieza que recortamos de 32 cm por 15 de ancho en la pestaña adicional que le dibujamos, allí le colocamos un poco de silicón. Y pegamos con el otro extremo, si no pega rápido podemos ayudarnos con las manos, ejerciendo presión hasta que logremos que seque el silicón líquido.
In this step we are going to begin to assemble our jewellery box the piece that we cut out of 32 cm by 15 cm wide in the additional tab that we drew, there we put a bit of silicone. And we glue with the other end, if it doesn't stick quickly we can help ourselves with our hands, exerting pressure until the liquid silicone dries.
También podemos usar el silicón caliente que es más rápido, pero a mí en lo personal me gusta utilizar el líquido, pues le tengo temor a utilizar la pistola de silicón.
We can also use hot silicone, which is quicker, but I personally like to use liquid silicone, as I am afraid of using the silicone gun.
Una vez seco el silicón con ayuda de las tijeras recortaremos la pestaña de 2 cm en varios cortes los suficientes como para lograr que se pueda dar la forma circular.
Once the silicone has dried, using the scissors, cut the 2 cm flange into several cuts, just enough to achieve the circular shape.
🌻 PASO 5 // STEP 5🌻
Tomamos la base circular que formamos en El paso anterior y le aplicamos silicón frío en la saliente que recortamos y pegamos suficiente para que pegue bien.
We take the circular base that we formed in the previous step and apply cold silicone on the protrusion that we cut out and glue enough so that it sticks well.
Y luego la pegamos en la base que recortamos de 20 por 15 a la que le hicimos lo adorno de forma circular.
And then we glued it to the base that we cut out of 20 x 15 and made the circular ornament.
🌻 PASO 6 // STEP 6 🌻
Fijé bien nuestro círculo a la base y luego de haberlo pegado yo recorte otro pequeño círculo el cual pegué en el centro para tapar los detalles, es decir lo pegué en la parte de adentro de nuestro círculo.
I glued our circle to the base and after gluing it I cut out another small circle which I glued in the centre to cover the details, i.e. I glued it to the inside of our circle.
🌻PASO 7 // STEP 7 🌻
Vamos ahora a elaborar la tapa del joyero por lo que tomaremos el círculo que previamente hemos recortado al igual que la tira de 2 cm y con ayuda del silicón vamos a pegar la la tira al círculo de esta forma formaremos la tapa.
We are now going to make the lid of the jewellery box, so we will take the circle that we have previously cut out and the 2 cm strip and with the help of the silicone we will glue the strip to the circle in this way we will form the lid.
Realmente te pasó Es bien fácil de elaborar una vez que ya haya secado podemos colocar la tapa encima de la base del joyero.
It's really easy to make, once it has dried we can place the lid on top of the base of the jewellery box.
🌻 PASO 8 // STEP 8 🌻
Aquí vamos a comenzar con los detalles de decoración, tome el foami amarillo y dibuje el girasol, yo marque unas 6 piezas, eso sí cada uno era más pequeño que el anterior, luego las recorte.
Here we are going to start with the decoration details, take the yellow foami and draw the sunflower, I marked about 6 pieces, but each one was smaller than the previous one, then I cut them out.
🌻 PASO 9 // STEP 9🌻
Aquí en este paso vamos a formar la base de los girasoles, para esto las flores que hemos picado anteriormente con ayuda de las manos vamos a ejercer un poco de presión en el foami
y vamos a ir dándole un poco de forma, a modo que queden hacia arriba, se puede ver de manera más detallada en la fotografía.
Here in this step we are going to form the base of the sunflowers, for this the flowers that we have chopped previously with the help of the hands we are going to exert a little pressure on the foami and we are going to give it a little form, so that they are upwards, you can see in a more detailed way in the photograph.
and we are going to give it a little shape, so that they are facing upwards, you can see it in a more detailed way in the photograph.
Luego aplicamos un poco de silicón frío en el centro de la flor y le colocamos otra base del girasol, cada flor la vamos a formar con dos con 2 bases de la que hemos ya picado previamente.
Then we apply a little cold silicone in the centre of the flower and we place another base of the sunflower, each flower will be formed with two of the two bases that we have already chopped previously.
🌻 PASO 10 // STEP 10🌻
En el foami marrón con ayuda de la regla y el marcador, marcamos unas 3 tiras una de 25 cm de largo por 2,5 de ancho, una de 18 cm por 2,5 y la otra 10 cm por 2,5 y recortamos.
Using the ruler and the marker, mark 3 strips on the brown foami, one 25 cm long by 2.5 cm wide, one 18 cm by 2.5 cm and the other 10 cm by 2.5 cm, and cut them out.
Con un palillo y la regla marcamos una línea al centro, cuando ya la tenemos recortada, le aplicamos Silicón y pegamos.
With a toothpick and a ruler we mark a line in the centre, when we have it cut out, we apply Silicone and stick it on.
🌻 PASO 11 // STEP 11 🌻
Tomamos la tira y con la tijera le hacemos muchos cortes a todo lo largo de la tira, y luego le aplicamos un poco de silicón frío y comenzamos a enrollar, esto lo haremos en las tres tiras que preparamos.
We take the strip and with the scissors we make many cuts along the length of the strip, and then we apply a bit of cold silicone and we start to roll it up, we will do this in the three strips that we prepared.
🌻 PASO 12 y 13 // STEP 12 AND 13 🌻
Luego colocamos Silicón frío en la parte de abajo de la pieza de color marrón y la vamos a pegar en el centro dela flor que elaboramos previamente.
Then we put cold Silicone on the bottom of the brown piece and glue it in the centre of the flower we made previously.
Este paso es bien fácil y sencillo, debemos realizarlo en las tres flores.
This step is very easy and simple, we must do it on the three flowers
🌻 PASO 14 // STEP 14🌻
Tomamos el foami de color verde también utilice escarchado y dibujamos muchas hojas la cantidad va a depender de ustedes la cantidad que quieran colocarle al trabajo.
We take the green foami also use frosted and draw a lot of leaves, the quantity will depend on how much you want to put on the work.
Luego las recorte y con las manos de fui dando forma diferente para darle textura a mi trabajo.
Then I cut them out and with my hands I gave them different shapes to give texture to my work.
🌻 PASO 15 // STEP 15 🌻
Como ya tenemos todos los detalles que vamos a utilizar para la decoración procedemos a darle vida a nuestro joyero, así que colocamos los girasoles en nuestro joyero.
As we already have all the details that we are going to use for decoration we proceed to give life to our jewellery box, so we place the sunflowers in our jewellery box.
Le coloque un poco de silicón frío en la base de la flor y la primera la coloque en la tapa del joyero este pasó lo hice con las tres flores qué vamos a utilizar la segunda la pegue en el centro y la última finalmente la coloque en la base de nuestro joyeros de esta manera logramos cubrir todos los ángulos de nuestro proyecto para que tenga decoración.
I put some cold silicone on the base of the flower and the first one I put on the lid of the jewellery box. I did the same with the three flowers that we are going to use, the second one I stuck in the centre and the last one I finally put on the base of our jewellery box.
🌻 PASO 16 // STEP 16 🌻
Finalmente para darle el toque de color a nuestro joyero fui pegando Las hojitas en sitios estratégicos para lograr darle vida a todo nuestra pieza.
Finally, to give a touch of colour to our jewellery box, I glued the leaves in strategic places to give life to the whole piece.
En el girasol de la tapa con le coloque tres hojas ustedes pueden colocar las que desea en la del medio le coloque Solo dos pero en la base le coloque 4 para lograr cubrir el espacio que se veía muy vacío.
In the sunflower on the top I placed three leaves, you can place as many as you want. In the middle one I placed only two, but at the base I placed 4 to cover the space that looked very empty.
De esta forma hemos concluido con la elaboración de este hermoso joyero qué es algo práctico lindo y muy fácil de crear para regalarlo a ese ser tan maravilloso como es nuestra madre espero que haya sido de provecho este tutorial Y por supuesto que sirva para aquellas personas que quieren y están dispuestas a crear con sus manos un lindo detalle para regalar a mamá o algún otro ser especial.
In this way we have concluded with the elaboration of this beautiful jewellery box which is something practical, pretty and very easy to create to give to that wonderful being as our mother is. I hope that this tutorial has been of benefit and of course that it serves for those people who want and are willing to create with their hands a nice detail to give to mum or some other special being.
🌻🌻🌻RESULTADO FINAL//FINAL RESULT 🌻🌻🌻
Esto ha sido todo por el día de hoy Espero realmente que les guste mi proyecto si es así ya sabes lo que debes hacer regálame tu foto déjame tu comentario con Las observaciones de qué puedo mejorar y por supuesto que re bloguees mi post.
That's all for today. I really hope you like my project if you do you know what to do, give me your photo and leave me a comment with your observations on what I can improve and of course reblog my post.
📸 Todas las fotos fueron tomadas con mi teléfono Xiaomi readmi 9T y son de mi propiedad utilice el traductor Deepl y el programa polish para la edición de las fotografías.
📸 All photos were taken with my Xiaomi readmi 9T phone and are my property. I used Deepl translator and polish to edit the photos.
***
