Hi DTube Woodwork Fans,
Welcome back to the final part of the oak door and side window.
The door, frame and window have had a final sand and are now ready for the wax oil finish.
I use a brush to apply the first coat so that I can get into the corners and so that I can get a good layer of finish on the bare oak.
Once it has had time to dry I give everything a rub down with 240 grit sand paper and the final coat will be done after installation.
I will have to wait for the glass and metal work to be made and then I will be able to do all the finishing touches.
I highly recommend that you make DTube videos to show us any woodworking projects you are working on.
If you have any technical questions give me a shout on the woodworking discord channel.
Disclaimer:
Always adopt safe working practices. The way I do things are for illustrative purposes only and may not work for you so make sure you have all the relevant safety information and protective safety wear.
We have started a woodworking community here on steemit and would welcome you.
We have a discord channel, link here: Woodworking on Steem Discord Channel
is a daily curation service for the woodworking community. 
Thanks for viewing,
Onwards and upwards,
▶️ DTube
▶️ IPFS