In this modern era the availability of electricity and water is the main thing. Everyone now can not live without electricity and water. They need electricity to turn on all electronic goods. They also need electricity to operate the machines in their factory. Neither is the availability of water. Water can be used for various needs of life. People need water for bathing, cooking, washing and other necessities. Water can also be used for power sources. Many hydroelectric power plants are made in several places. In some remote places that have not been touched by electricity, many people choose to use a waterwheel to make or produce electricity. In addition to reducing pollution and global warming levels, waterwheels are also cheap and environmentally friendly. In urban areas many people lack water resources. Many of the green fields have changed functions as urban and residential areas. As a result many water sources are lost. In rural areas, many people choose to drill wells because they do not have to rely on electricity. In making wells, you should see the field first. You are also required to consult a drilling well. They are usually experienced for a long time in making wells so they know how to make the best well for you. The cost of manufacture will depend on the quality of the well you want. In the rainy season you can get a larger source of water. Many people use modern tools to make wells. Some of them use simple tools to find a spring for their wells. The following are two techniques used to create a wellbore. The technique below is an easy technique with materials that you can find easily as well.
Drilling Well Technique with Salt
Salt can be useful for some things. Salt is commonly used for cooking, repel snakes that enter into the house and can be used to determine the point source of water.Teknik with salt is very famous and has been widely used by many people in making a wellbore. Why can salt be used to make a wellbore? Salt contains iodine. The salt is placed on a used tin and one side of the tin is opened. In the morning you can see the salt, if you live a little salt means you can get a quality water source at that point. You can put salt at some point so you can get some water sources at once. This will save you time. You do not need to use sophisticated tools to determine the water source. Salt can be found easily. You can use salt whenever you want to determine the location of the spring.
Drilling Well Technique with Banana Leaf
You can find the water source point for well bordengan technique banana leaf. This banana leaf can be used for moisture analysis. How to use a banana leaf to find a point to dig. You can put some banana leaves and place them at some point at 9 or 10 at night. If in the morning you see the dew that sticks then you point it is the source of water. The more dew point there is the more water that is below and ready to be excavated. Although the technique is very easy, you should still pay attention to good drilling techniques and quality well. You can find more information about these two well drill techniques on some internet sites.
Manual Drill Making Process and Determining the Source of Clean Water
The well is a hole or burrow dug into the ground in order to produce air, oil, or likes to know the state of the soil.
Traditional wells are usually excavated with a rather large hole diameter, then in the walls are given a wall so that the land does not collapse, landslide, or fall. Equipped with pulleys and buckets as a means to take air from inside the well
Its use is usually manual, in the sense of being drawn directly by humans.
Today there are many modern wells made with drill techniques; then it is called a borehole.
Drill wells are not like many traditional wells. Drill well usually only with pralon pipe only, then the water is sucked with water pump. More automated, saving time and effort.
But there are some wells that do not need to drill the pump because the water is automatically burst out. Its name is artesian drill wells flowing.
Manual Drilling Well
Drilling wells can be made manually by manpower or assisted with machines quite easily.
In drilling wells manually, it takes 2 people who will work as a team.
Both people will help each other drill drill that is horizontal pipe.
Well Drill Tools to Prepare
A. Pipe-shaped iron with a diameter of at least 3 inches, length adjusted to the wells to be digaliPipa drill via
B. Content cross four, which would be used as a drill hand for play
C. Hoe

D. Vacuum machine
E. Pipe diameter of 5 inches, 3 inches, 1 inch, and ½ inch.
Manual drilling well process
Find the place that will be used as well, then hoe surface up to approximately 60cm. Then fill the water for easy installation of drill pipe.
Install the air suction machine; one hole fitted with a hose to suck, one more lubanynya mounted to the iron pipe / drill pipe to irrigate the soil more easily drilled.
Immerse the drill pipe into the ground.
Draw the drill bit with the monkey key, then turn one direction.
After feeling deep enough and in accordance with the desired depth, then pairs of pipes in sequence from the largest to the smallest; use to support the ground so as not to collapse.
Connect the pipe from the wellbore to the water pump.
Drilled well water can be drained through the faucet.
refference/source:
https://satriabajahitam.com/bor-sumur/
https://sumurbor.org/sumur-bor/sumur-bor-dan-teknik-pembuatannya
http://sumurborjogja-sedotwc.com/
UPVOTE AND FOLLOW
