Hello steemit friends, in this post I will show you how to make a multi-colored led lamp.
To add a touch of color, I used a multicolored RGB LED strip along with its controller. This combination allows me to achieve a variety of colors and lighting effects.
Cut the acrylic sheet
Prepare the templates
You can download the templates of your choice from the Internet and print them on paper. They can also make their own templates.
Then cut out the stencils by keeping a little margin and make sure the acrylic sheet with the tape.
Acrylic Sheet Engraving
This is the most difficult step of this project, we must have a lot of patience and record the parts we want from the template with dremel
Design of the base
THE BASIS IS DESIGNED IN 3D TO PRINT IT, THEY CAN DOWNLOAD FROM HERE
https://www.thingiverse.com/thing:2494154
Adding the RGB LED Strip
wiring
FINAL
