We got a little project to create the computer network using cable in 3 Schools. This network will be used to Students final exam it's computer based test. Very simple peoject, but it's take 4 up to 7 days to finish it.
So, what we need to start our job?
- UTP Cable (we use ProLink cat 5e cable, I recommend it for low price, for bigger network please use better cat 5e cable, like : Belden, AMP, or some other familiar branded).
- RJ45 Connectors (we're using AMP 2nd quality, again this is for low prices, I don't recommend it for bigger networks)
- Switch/Hub. We are using 2 x 16 ports + 1 x 8 ports it's prepared for 35 clients and 1 server.
- Crimping tools. There is too many various of crimping tools models, so please choose better one.
- Electric sockets, as source of power supply for each computer.
- Electric cable. I am using 2x1.5mm.
- 25 Ampere Circuit breaker for each 10-12 computers, bigger is better.
- Cable ducting. To hiding all cables.
First step, make a 6mm hole using a drill on the floor, and attach the Fischer to be installed screws and holding cable ducting.
Place the electric socket near to cable ducting. Make a hole too and attach fischer.
Then, put UTP and electric cables into the duct and connect it to hub and computer.
Then when every thing finished, close the duct by it cover and then cleaning the room.
I am too busy to start writing and write long explain about this. there is too many job to be finished in this short time.
thanks for visit my blog.
