FIXED SAVING LIGHT BULBS

Good afternoon, friends of steemit. Today I decided to stay at home and not go out and work on some air conditioning earrings, because I wanted to do some work here. For example, fixing some energy-saving light bulbs, since they are very expensive here and my wife had been telling me to fix them for a while.

As I was saying, I arranged several energy-saving light bulbs to make a hybrid so I could have light at home. Of course, I worked very carefully not to get contaminated with lead from light bulbs.

At first I tested each filament and selected the good ones. Then, the baseboards that would serve the thermofuse and finally the cards that would serve all its electronic components. This way, I made a hybrid. This hybrid I made with the set of good pieces to build one. On this job, I pulled out three light bulbs, one 18w and two 45w.

Checking the filaments

Going through the cards

Building the hybrid

bulb installed

I hope this post has helped you a lot and that you can fix your damaged