STEP EXPERIMENTS
1.Open the application of blend as usual
2.press shift and select the object cylinder
3.Press the S and Z to extend object
4.Press Tab to change the object mode to edit mode
5.then the bottom of the selection object to form the base of the bottle look fine by pressing control R and pull the lower inner corner
in the middle of the object, we form taper by means of selection as usual and then press S and slide the mouse to the front so that the object will turn into a taper
and pull upward with the way the press E and pull the Blue axis upwards
select the color for the grant of the right type of active data: material
click New
then the display will go out as below,
next at the diffuse click at the color, and adjust the color according to the wishes
then the object would look like this
if you want to copy the same object then press shift D then the image will look like below
if you want to give different colors in the same way then as above
The results of the project
The rendering result
so tutorial from me may be useful :)
download
Note : Bottle
Posted on Utopian.io - Rewarding Open Source Contributors