Using a snorkel to create a train tunnel orb. Torch used was the Lightpainter from @lightpaintingparadise on strobe mode. Scroll for pix of the tool. instagram.com/rod.evans.visual

A simple tool was used for this one...just a torch. The Lightpainter torch from @lightpaintingparadise to be exact. I had it mounted on the end of a pole and set to a 5ms flash strobe mode. Single exposure:

Some light painting I did in a train tunnel a few months ago. Tool used was a frosted acrylic tube attached to the RGB control unit of the @buyfiberflies Pixel Whip. Scroll for pix. Single exposure: 10mm,

Some light painting I did at a local creek while the Milky Way was setting in the west. Tool used for the orb was a purple acrylic tube with a 'bunch a balloons' orange plastic thing stuck on the end.

A broken orb I made in a train tunnel recently. Tool used was a blue acrylic tube with a pink plastic tip (scroll for pix). Torch used was the Lightpainter from @lightpaintingparadise After I created the

Light painting in an abandoned train tunnel. A simple tool was used for this one...just a torch. The Lightpainter torch from @lightpaintingparadise to be exact. I had it mounted on the end of a pole and

Light painting at a local creek with the lovely Rachel posing under the Milky Way. Tool used for the orb was a blue acrylic tube with a 'bunch a balloons' pink plastic thing stuck on the end. Scroll for

Some glowing light painting I did at a local creek recently while the Milky Way was slowly inching towards the horizon in the west. Tool used was a purple acrylic tube with an orange 'Bunch O Balloons'

Spinning a spiral in the train tunnel last night. A simple tool was used for this one...just a torch. The Lightpainter torch from @lightpaintingparadise to be exact (swipe left for pix) I had it set to

Some light painting I did on top of a rocky outcrop at Valla Beach a few nights ago. This was a test of a new tool; a 'Bunch'o'Balloons' pink plastic straw-like cap taped on the end of a blue acrylic tube

Light painting in the train tunnel last weekend. The tool used for the orb was a frosted acrylic tube attached to the RGB control unit of the @buyfiberflies Pixel Whip (scroll for pix). After creating

Some light painting I did at a local creek last weekend while the Milky Way was setting in the west. The orb was created by hand using a homemade light box (with a star-shaped stencil taped inside it).

I captured this late one night at Tosha Falls a few months ago. It was a bit of a mission trying to find my spot in the middle of the stream but after about 5 attempts wading through the shallow (but powerful)

I captured this at the beach a few months ago. The tide was rushing over the sand so I was standing in a shallow river to spin the spiral. Tool used was a blue acrylic tube with a pink plastic tip taped

Some light painting I did on Friday night at a local creek, with the lovely Rachel posing under the Milky Way. This shoot was a test of a new tool I acquired recently, a clear 'frosted' acrylic tube. The

An orb I created on top of a rocky outcrop at Valla Beach a few weeks ago, with the lovely Rachel (@ochre_anne) absorbing its unearthly power. This was a test of a new tool; a 'Bunch'o'Balloons' orange

I captured this image on the last night of the Wide Open Space festival (@wos.fest) near Alice Springs last week. The festival site is located at Ross River Resort (situated in the foothills of the amazing

Light painting under the Milky Way... I captured this image last year on a lonely road near Coraki, NSW. I've been light painting for about 4 years now and when I venture out to a location, I usually try

Tool used was an orange acrylic tube with a purple plastic tip taped on the end. Scroll for pix of the tool. Torch used was the Lightpainter from @lightpaintingparadise (use code RODEVANS for 10% off at

A broken orb I created recently at a local macadamia farm. Tool used was an orange acrylic tube with a purple plastic tip taped on the end. Scroll for pix of the tool. Torch used was the Lightpainter from