... dozen people want to buy one. It is also, LEDs aside, made from completely upcycled materials I remachined. I will be making about 25 of them to start, and they will shall sale for $50 to $100 range.

... a local eatery with a friend who makes perfume, Fluri United. Another friend came along and snapped this shot! Looks mad science to the max! If you are in Austin, be sure to check out Bouldin Creek

... aluminum, poured epoxy and a flexible vacuum tube from a Scanning Electron Microscope. It is lit with 3x E12 RBG chandelier bulbs. Has adjustable legs for leveling. The thing in background is a Sputter

... to upload this one In the first place. Hahahah. These are a real hassle to make, but I have made many a process improvement over that past few weeks.

... first, and I am making more. They will only get better. It measures about 15" square and is now a friends.

... Lifes busy with the Electron Microscope business and fabricating lamps. Taking a little break tonight at a one of my main hangouts in Austin TX, Casino Southside. Not actually a Casino, but the owners

With its googly eyes And pulsating brain Pretty sure, this lamp be insane Life has been really busy so, have not been doing much on Steemit. Today I was looking at this lamp and thought that it really

I caught him staring at me, slack jawed, mouth a gap, indiscreet. With his beady eyes, cold as concrete. I said "What are you looking at cracker?", chuckling at my bad pun. He just continued

Tucked away in an alley behind Main st. and just doors from Orange st. is a speakeasy kind of place with a super relaxed atmosphere. Walking up to the entrance you do not expect much, due to the low key

....

Been working on the west coast of Florida for the past week and a half on a TEM install. Since I was here through the long weekend I decided to take a trip and visit an old friend Zane who moved to Orlando

... are many ways do this. One way is by isolating a suspect section, which is what I have just done. What you see is the upper objective and beam forming section hanging from the gun. I had separated

Who's the googlyest of them all? Sitting in my hotel room thinking it had been a while since I participated in the googly prize. Then it just jumped out at me! So I fashioned me some googlys from some

It's a damn nice beer to have after hauling a TEM from Texas to Florida. I loaded the beast up Sunday into a 26 foot truck. Two accidents on the highway, and some scattered rain later I roll into Sarasota.

Stage from an old Philip's EM 300 or 301, interchangeable from what I know. The two large cylinders protruding from top and bottom are the specimen exchange airlock/goniometer and the "ear" for

... urposed into an aesthetically pleasing scifi inspired accent lamp.

Over 10 years jerking around these things and proud to say I have never damaged a pole piece, seen a few wrecked in the field tho 🤣😂. Usually dropped by a poorly trained FSE. Pole piece is the shiny

Sadly, he will never be turned on again. That's the mains power switch, and the fuses for the 220 Volt 40 Amp supply for an old Philip's EM430 Transmission Electron Microscope. Under optimum conditions

I like the graffiti, shadows and the tattoo sign. The punk bar is actually more of a wide spectrum venue, but there are often punk bands playing. It's called Barracuda.