Hello and welcome to my channel, Hardware.ai! Today’s video is going to be a quick review of face recognition model and firmware for K210 chip, developed and published by Sipeed. I already made the videos

I had no experience building quadcopters before, but I built one all the same, just to show them. It crashed horribly. So I built a second one. That one crashed horribly. So I built a third. That burned

Below is the video's script. Hello and welcome to my channel, Hardware.ai. This week I went to 12th AGI Conference here in Shenzhen, China. In this video I would like to make a quick summary of the conference

I suffered, so you wouldn't have to! The video, together with the article describes the process of compiling ROS Melodic from source on new Raspberry Pi 4. Also demos of using RPILIDAR A1M8 and Xbox 360

Let the strongest win! In this video I compare hardware specs, official benchmarking results, my own benchmarking results and user experience for both boards.

Here is a quick follow-up to my series of videos about PYNQ Z-2, an FPGA Development board. The main goal of this article is to provide a quick summary of the video for the people who prefer to read and

I already wrote one article on how to run OpenMV demos on Sipeed Maix Bit and also did a video of object detection demo with this board. One of the many questions people have asked is - how can I recognize

Nvidia Jetson Nano is a developer kit, which consists of a SoM(System on Module) and a reference carrier board. It is primarily targeted for creating embedded systems that require high processing power

Nvidia Jetson Nano is a developer kit, which consists of a SoM(System on Module) and a reference carrier board. It is primarily targeted for creating embedded systems that need high processing power for

Intro Hardware overview Software overview: Preparing for the first boot and examples

This is the second article in series about Sipeed AI on the Edge microcontroller platform. This time I will be writing about MaiX Bit(link to Seeed Studio Shop), a smaller, breadboard ready development

If you have been following the news recently, there was an explosion of start-ups developing chips for accelerating ML(machine learning) algorithms inference and training. However most of those chips are

It has been a while since a published an update to my project. I started a new job as product manager for Seeed Studio/Chaiohuo Makers and moved to a new place. I was still working on my robot arm project

  In the previous part of the article we have  created URDF and XACRO files for our robotic arm and launched RVIZ to  control our robotic arm in simulated environment.This time we'll  do

This is going to be a series of articles about  making a robotic arm controlled with ROS(Robotic Operating System) and  MoveIt. If you are into robotics ROS is a great framework that will help

This is a robotic arm with motion planning I made recently using ROS and MoveIt for motion planning. The arm itself is 3D printed, you can download STL files here. All credits goes for 3D models goes to

A project I have done in my spare time. It is a  full-drive 4 wheel robot controlled through a web interface. If you  have any comments or questions please feel free to contact me. This  project