Today I would like to explain just why Earthships work SO well, and give a bit more detail about building tyre walls. The first week or two of any small Earthship build is mostly concerned with tyre ramming and some void packing of the walls with mud. This knowledge is one of the most important aspects of Earthship construction in terms of an Earthships performance and durability. Luckily, building a house from tyres is WAY less technical and complected than any traditional brick and mortar build.
We had a team of around 20 volunteers with a few Nepali helpers as backup. Whilst almost no one except for 
It is this mass that also provides the ability for an Earthship to perform and hold a stable temperature even at -20 Degrees Celsius. There is no other model of building that I have ever seen that can offer a comfortable climate at these temperatures without additional heating. Whilst many buildings are well insulated, few have enough thermal mass. Insulation will hold whatever heat you have in the room for longer, but it will not supply any additional heat. Thermal mass on the other hand is like a battery for the sun's warmth and they charge up all day in the sun and release that warmth back into the house as it cools down below the temperature of the walls. This is why an Earthship is called a passive solar home.. because it passively absorbs the heat from the sun and stores it in the walls.
SO Earthships are able to outperform anything else because it has both insulation and thermal mass in spades (excuse the pun)! Most Earthships that are built in a cold or hot climate will be partially buried and further insulated not only by foam and other insulation materials, but also by several feet of dirt. And to cap it off, Earthships and tyre walls are also earthquake resistant and fire proof. Once you start getting into the story of why we use tyres, you quickly find that they are quite compelling!
How To Build Using Tyres
The main skills you need to build a tyre wall are the ability to pound a tyre, and the ability to check its level and make adjustments. It is very simple but does require some attention to detail and the use of a spirit level. Pounding a tyre is undoubtedly the most physically demanding part of Earthship construction, but I wouldn't say it was the hardest! One of the most common criticisms I hear about Earthship construction is how hard it is to pound tyres. Let me ask you, what other kind of wall can you build in 10 days and unskilled workers!? In all my previous builds the tyre ramming was the most fun, and easy part of the build. Sure it was hard work, but there were many of us and each of us worked at our own pace. Many people took a day off here and there, or worked less hard, and that was fine. So don't be put off by half truths and hear the real story here!
"Every tyre you pound today is another 10 kilos of wood you don't have to chop tomorrow, or money you have to earn in order to pay for power bills! This is not only your house, but also your heating and cooling system for life!"
Pounding a tyre starts by putting the tyre in place on the wall and adding a a couple of layers of cardboard inside it. This will stop the dirt spilling out before it is compacted. Once it is filled you don't need to remove it as it will decompose by itself in time. Then working in teams one person brings buckets of dirt and the other person starts to push it in with their hands. It takes a lot of dirt before you even need a hammer, and both of you can even fetch dirt at the beginning. Then as it begins to fill you can stand on it and kick the dirt to start the compacting process. You can also just use the side of a sledge hammer to start compressing the dirt in the edges of the tyre. The center is the last to be filled up, so you keep adding and pounding the sides until they are very firm and then add to the center. It will take a LOT of effort to get the tyre to become rock solid, and that last 20% is the hardest part. The rest is really easy for just about anyone (we had kids doing this!), and so you can save your strongest people to focus on finishing. Once you can feel that the edges are rock hard with no soft spots you can fill the center and tamp it down with a good heavy metal tamping tool. You can also jump and stamp on it, which is also known as dancing when there is some music playing!
Here is Marty cramming some stones in to finish off the tyre.
Together WE can do anything and it doesn't even feel like work!
Launching a cob ball at the wall. Caution, can lead to mud fights!
So easy a child can do it, no problem! Watch your toes! =)
Whilst you are doing all of this pounding you are also checking the level of the tyre. It needs to be sitting dead center and not an inch or two more on one side. This means that the wall will stand straight up and won't lean over and topple! If you are burying your walls then you will lean the back wall slightly backwards into the dirt berm, in which case you do step each layer back about an inch. The height of the tyre also needs to be the same as the tyres next to it so that each level is one uniform height. We do this using string that is tied next to the walls so we can compare the levels. You can easily add or remove height from a tyre by adding more dirt and even stones, or tamping it down if it is too high.
In this way you can build these walls using many unskilled people and really very quickly. The conditions were tough on this workshop, and we had rains and total mist for days on end. Despite this, we managed to continues working although it did slow us down a bit.
Now Please Watch What I have just said happen by the magic of youtube!
Once you get past the first few layers of tyres you can already start filling in the gaps on the inside and outside of the wall with cob. Cob is mixture of mud, straw (we used coconut hair), and water. It works best when there is some clay content in the soil, but can be done with pretty much any kind of dirt.
Here you can see a volunteer throwing a ball of cob at the gaps
We had several children join us for this build including some of the kids who lived at Karuna at the time. They helped us so much, and also learned a lot themselves. This is home-schooling at its best folks!
Whilst all this was going on, a small team of us set to work getting the window frames and door frames set up. When you build an Earthship you can install the frames in place very early on and prop it up with sticks. This allows you to build the frame into the wall, and anchored to the tyre wall foundation below it. This process does need some skilled labour, mainly a carpenter and maybe a maisoner. We were fortunate to have more than one, with
Setting up the window frame with a tar sheet to protect it from dampness.
Uri keeping an eye on us and soaking it all up like a sponge!
Women Will Build our Future!
So I hope you can see that in the spirit of co-operation and open sharing we has a fantastic time and made great progress even in the first few days! I hope i have been able to inspire you and demonstrate that you can self build if you do it with help and a well intentioned group. There are SO many people wanting to build, but so few actually building. The only way is to Just Do It! Start small, make a test in your yard or for a friend and learn from that. Then one day you can perhaps join a group of people who want to do the same and work together to help build each others dreams!
I hope to be able to create an Earthship community one day, and am currently saving up so that I can make this happen at very low cost for others to own. This is what I am doing with my rewards and all my cryptocurrency investments. I hope that one day this dream of mine will be possible!
Thanks for being here with me and the #ecotrain!
We are a small community that support each other because we love what we write
about things that help make the world a better place
check our our ecoTrain magazine at
