Hola, aquí les traigo uno de los proyectos más recientes que he hecho, este fue para una señora que buscaba un nudo de brujas, pero termino queriendo este nudo celta llamado triqueta, el cual tiene una simbología diversa, pero principalmente representa el ciclo del nacimiento, la vida y la muerte; las tres etapas de la mujer como lo son la doncella, la madre y la anciana; los planos, físico, mental y espiritual. Al observar este símbolo se puede apreciar la unión, interacción y eternidad de cada uno de sus aspectos representados; es considerado un elemento de protección ante las energías negativas.
La señora quería que la triqueta estuviera en un anillo ajustable con un adorno o forma que había visto en un modelo anterior que yo había realizado. Ahora solo quedaba entrar en la computadora y ajustar el tamaño de la figura para poder cortarla y hacer el anillo, para esto usé el programa Inkscape, aquí diagrama para ser impreso en una hoja carta con la figura a tamaño real.
Sobre las herramientas y materiales tenemos:
- Lámina de plata 1 mm, hilo de plata 1,2 mm.
- Mandril de anillos
- Arco de segueta y sierras 2/0
- Soplete y soldadura de plata
- fresa o broca para abrir hueco de 0,8 mm
- Dremel o motortool
- Limas de joyería, lija 220, 360 y 400.
- Pinza de joyería.
- Cera de pulir, motor de banco y disco de tela de algodón.
Proceso
Se pegó en la lámina de plata la impresión de la triqueta, use un recorte de lámina porque la pieza es pequeña y hay que aprovechar el material.
Con el Dremel y la fresa de 0.8 mm, fui abriendo los huecos internos de la figura a cortar.
Usando la segueta y la sierra 2/0 corte la parte interior de la figura,l evidentemente con mucho cuidado.
Después corto la silueta exterior de la triqueta con la segueta.
Le quito el papel a la lámina para ver mejor el resultado e ir corrigiendo la pieza, asunto que iré haciendo poco a poco con la segueta y algunas limas de joyería.
Aquí se aprecia más o menos la evolución de la figura, con la misma segueta, con un corte inclinado y superficial, haré las líneas de los cruces.
Así queda al final la triqueta, está lejos de ser perfecta, pero las piezas hechas a mano suelen tener esos detalles que son naturales, aun así está linda y tiene su propio carácter y personalidad.
Para llegar al resultado que vemos arriba, debí soldar un hilo de plata de 1.2 mm, empleando el soplete y soldadura de plata, una vez soldado use el mandril de anillos para hacer el aro, con una pinza redonda hice las curvas de abajo, en este proceso fui ajustando y probando entre con el mandril, la pinza y finalmente limé la punta de abajo para darle un acabado más delicado.
Una vez ya conforme con el anillo, procedí a lijar con las lijas 220, 360 y 400, para después pulir en el motor de banco, usando el disco de tela de algodón y cera de pulir, arriba pueden apreciar el acabado.
Espero les haya gustado el proceso de creación de esta pieza, a la señora le encanto y me comento que sus compañeras de trabajo quedaron enamoradas con este anillo, así que dígame ustedes en los comentarios que tal les pareció.
Les invito a ver más de mis piezas en:
https://www.instagram.com/m16ueljoyas
+++++++++
++++++++++
++++++++
English version made with Google Translate
)
Hello, here I bring you one of the most recent projects I have done, this was for a lady who was looking for a witches knot, but she ended up wanting this Celtic knot called triqueta, which has a diverse symbology, but mainly represents the cycle of birth. , life and death; the three stages of woman such as the maiden, the mother and the old woman; the physical, mental and spiritual planes. By observing this symbol you can appreciate the union, interaction and eternity of each of its represented aspects; It is considered an element of protection against negative energies.
The lady wanted the triqueta to be on an adjustable ring with an ornament or shape that she had seen on a previous model that I had made. Now all that was left was to enter the computer and adjust the size of the figure to be able to cut it and make the ring. For this I used the Inkscape program, here is a diagram to be printed on a letter sheet with the figure in real size.
Regarding the tools and materials we have:
- 1 mm silver sheet, 1.2 mm silver thread.
- Ring mandrel
- Saw bow and saws 2/0
- Silver solder and solder
- milling cutter or drill bit to open a 0.8 mm hole
- Dremel or motor tool
- Jewelry files, 220, 360 and 400 sandpaper.
- Jewelry clamp.
- Polishing wax, bench motor and cotton cloth disc.
Process
The impression of the triquetra was glued to the silver foil, I used a foil cutout because the piece is small and you have to take advantage of the material.
With the Dremel and the 0.8 mm milling cutter, I opened the internal holes of the figure to be cut.
Using the saw and the 2/0 saw cut the inside of the figure, obviously very carefully.
Then I cut the outer silhouette of the triqueta with the saw.
I remove the paper from the sheet to better see the result and correct the piece, a matter that I will do little by little with the saw and some jewelry files.
Here you can more or less see the evolution of the figure, with the same saw with an inclined and superficial cut I will make the lines of the crosses.
This is how the triqueta looks in the end, it is far from perfect, but handmade pieces usually have those details that are natural, even so it is beautiful and has its own character and personality.
To get to the result we see above, I had to solder a 1.2 mm silver wire, using the torch and silver solder, once soldered I used the ring mandrel to make the ring, with a round clamp I made the curves below, in This process I adjusted and tested with the mandrel, the clamp and finally filed the bottom tip to give it a more delicate finish.
Once I was satisfied with the ring, I proceeded to sand with sandpaper 220, 360 and 400, and then polish on the bench motor, using the cotton cloth disc and polishing wax, above you can see the finish.
I hope you liked the process of creating this piece, the lady loved it and she told me that her co-workers fell in love with this ring, so tell me in the comments what you thought of it.
I invite you to see more of my pieces at: