Un saludo, mi gente maravillosa de hoy les traigo algo muy diferente ya que hice un "dije de Lava Spider" personaje de las cartas de Chao Legión, para participar por primera vez en Splinterlands Art Contest #258 esta carta posee en su nivel más alto dos cosas que me llaman la atención habilidades muy buenas, la primera es Snare: Una excelente habilidad que quita la habilidad de “Volar” a los monstruos que logre alcanzar con su ataque de rango; y la segunda es Poison: Una habilidad realmente peligrosa, capaz de tener la probabilidad de envenenar a sus rivales si aciertan un ataque, quitándole -2 puntos de vida en cada ronda.
Me pareció una excelente idea hacerla en un dije, ya que es una araña con super poderes mágicos, y nada mejor que poder tenerla en un collar y así presumir esos poderes.
Greetings, my wonderful people of today I bring you something very different as I made a "Lava Spider's I said " character from Chao Legion cards, to participate for the first time in Splinterlands Art Contest #258 this card possesses at its highest level two things that catch my attention very good skills, the first is **Snare: **An excellent ability that removes the ability to "Fly" from the monsters it manages to reach with its ranged attack; and the second is Poison: A really dangerous ability, capable of having the probability of poisoning its rivals if they hit an attack, taking away -2 life points in each round.
I thought it was an excellent idea to make it in a charm, since it's a spider with super magical powers, and there's nothing better than being able to have it in a necklace and show off those powers.
Materiales:
🕸 Pinzas de Bisutería
🕸 Alambre Dorado #20 y #16
🕸 2 Piedras negras tamaño #4 y #2
🕸 Mostacillas pequeñas negras, naranjas y doradas.
🕸 Alambre de cobre
Materials
🕸 Jewelry Clamps
🕸 Golden Wire #20 and #16
🕸 2 black stones size #4 and #2
🕸 Small black, orange and gold beads.
🕸 Copper wire
Paso a Paso / Step by Step
Lo primero que haremos cortar un alambre de 20 cm número 26 y vamos a introducir en la punta dejando aproximadamente centímetro y medio una mostacilla de color naranja.
The first thing we will do is cut a 20 cm wire number 26 and we are going to introduce in the tip leaving approximately one and a half centimeters an orange mustard.
Con el centímetro y medio que dejamos vamos a enrollar atrapando la mostacilla, colocaremos otra y con esta haremos Lo mismo para así hacer los dientes de la araña. Solo se trata de dar vuelta al alambre enrollando para darle la forma.
With the centimeter and a half that we leave we are going to roll up trapping the bead, we will place another one and with this one we will do the same to make the teeth of the spider. It is only a matter of turning the wire around to give it the shape.
Vamos ahora a introducir la piedra más pequeña y luego la piedra más grande, vamos a llevar nuestro alambre al centro después de la piedra grande y vamos a introducirlo de arriba hacia abajo para sacarlo y que quede entrelazado entre ambas piedras.
We are now going to introduce the smaller stone and then the larger stone, we are going to take our wire to the center after the large stone and we are going to introduce it from top to bottom so that it is intertwined between the two stones.
Con el alambre Sobrante al final vamos a hacer un espiral que llevaremos hasta la piedra.
With the wire left over at the end we will make a spiral that we will take to the stone.
Ahora cortaremos tres alambres de 10cm número 26, los entrelazaremos a la mitad los tres y luego comenzaremos con ellos hacer nuestras patas de la araña, abrimos y vamos a introducir tres Piedras Negras y cuatro naranjas esto lo haremos tres veces.
Now we will cut three 10cm wires number 26, we will intertwine them in half and then we will start with them to make our spider legs, we open and we will introduce three Black Stones and four oranges, we will do this three times.
Al final de cada pata vamos a colocar una mostacilla dorada y vamos a cerrar con el alambre dándole vuelta, y esto haremos con cada una de las patas.
At the end of each leg we are going to place a golden bead and we are going to close it with the wire by turning it around, and we will do this with each one of the legs.
Ahora con el alambre que nos queda vamos a llevarlo al centro de nuestras piedras y vamos a dar dos vueltas, y luego comenzamos a hacer las mismas patas que hicimos pero del otro lado.
Ya tenemos nuestro primer dije, solo hace falta colocarle una argolla en los colmillos y listo.
Now with the remaining wire we are going to take it to the center of our stones and we are going to make two turns, and then we start to make the same legs that we made but on the other side.
Now we have our first pendant, we just need to place a ring on the fangs and that's it.
Ahora tomaremos alambre número 20 de 10 cm y cortaremos tres alambres, en cada punta vamos a hacer con nuestra pinza redonda un arito como de alfiler, también tomaremos alambre de cobre, en este caso un alambre de cobre de tres pelos fino que era el que tenía y vamos a entrelazar los tres alambres a la mitad para así poder tejer nuestra tela de araña.
Now we will take wire number 20 of 10 cm and we will cut three wires, in each tip we will make with our round pliers a little ring like a pin, we will also take copper wire, in this case a copper wire of three fine hairs that was the one I had and we will intertwine the three wires in half in order to weave our spider web.
Vamos a tejer nuestra tela de araña pasando el alambre de cobre por cada uno de los alambres número 18 dando una vuelta y seguimos, damos una vuelta y seguimos hasta el otro alambre hasta llegar al final y allí cerramos con una vuelta triple, prensamos con nuestra pinza plana para que no se salgan, así hemos terminado nuestra tela de araña y esta telaraña puede ser otro dije, entonces montaré el primer dije de la araña colocándole un aro en la parte de los colmillos y vamos a colocarla en la tela de araña y a la tela de araña le colocaré otro aro para formar un dije completo.
We are going to weave our spider web passing the copper wire through each one of the wires number 18 making a turn and we continue, we make a turn and we continue to the other wire until we get to the end and there we close with a triple turn, we press with our flat pliers so that they do not come out, so we have finished our spider web and this spider web can be another charm, then I will assemble the first charm of the spider placing a ring in the part of the fangs and we will place it on the spider web and to the spider web I will place another ring to form a complete charm.
Resultado: / Result:
Y así ha quedado nuestro sencillo tutorial, espero que sea de su agrado, tanto como me ha gustado a mi esta pequeña y hermosa creación.
Gracias por estar aquí y ser parte de mi blog y de la comunidad 😉
And this is how our simple tutorial turned out, I hope you like it as much as I liked this beautiful little creation.
Thank you for being here and being part of my blog and the community 😉.
Les invito a suscribirse a la comunidad de @Jewelry y poder así mostrar todas sus creaciones de accesorios, tanto de adultos como de niños; nos encanta ver y apoyar a todos los artesanos, manualistas y orfebres, puedes crear accesorios para damas, caballeros y niños, así que tu creatividad es el límite 😉
I invite you to subscribe to the @Jewelry community to showcase all your accessory creations for both adults and children; we love to see and support all the artisans, crafters and goldsmiths, you can create accessories for ladies, gents and kids, so your creativity is the limit 😉.
"Los accesorios tienen el poder de hacer sentir a la mujer única y especial"
Accessories have the power to make a woman feel unique and special"
Fotos principal editada con Canva.
Separadores de mi Autoría
Fotos de mi Autoría derechos reservados
Cámara: Samsung M31
Traducido con www.DeepL.com/Translator (versión gratuita)
Photos edited with Canva
Separators by me
Photos by me Author's rights reserved
Camera: Samsung M31
Translated with www.DeepL.com/Translator (free version)