Hello HIVEs!
Last weekend I met
Hive account@lichtkunstfoto,
Hive account@stepko,
Hive account@gunnarheilmann, Hans, Anja and Matthias at a former Soviet airfield for light painting. The weather was so bad that no light painting was possible outside. Even in all the dilapidated buildings, the rain dripped through the ceilings everywhere. So we looked for one of the few dry spots on the site. Anja and Matthias had put an Audi TT COUPÉ 2.0L 245PS in turbo blue in an old hangar. Now we could let our creativity run free. Everyone had developed ideas in advance, which we now worked through one after the other.
Letztes Wochenende traf ich mich mit
Hive account@lichtkunstfoto,
Hive account@stepko,
Hive account@gunnarheilmann, Hans, Anja und Matthias auf einem ehemaligen Sowjetischen Flugplatz zum Light-Painting. Das Wetter war so schlecht, dass draußen kein Lightpainting möglich war. Selbst in all den maroden Gebäuden tropfte der Regen überall durch die Decken. Also suchten wir uns einen der wenigen trockenen Flecken auf dem Gelände. Anja und Matthias hatten einen Audi TT COUPÉ 2.0L 245PS in turbo-blau in einen alten Hangar gestellt. Nun konnten wir unserer Kreativität freien Lauf lassen. Jeder hatte im Vorfeld Ideen entwickelt, die wir nun nacheinander abarbeiteten.

Canon EOS 6D Mark II
EF16-35mm ƒ4L IS USM
ISO 100; 16 mm; ƒ8; 79s
I had prepared four light painting ideas. I was able to implement two of them. Unfortunately, there was not enough time for more. A pixel stick was used for the title image. I had previously drawn a rally checkered flag as a BMP file and loaded it into the pixel stick. (More information about the tool below) Now I tried to imitate the course of the checkered flag at the finish line with the pixel stick. The hangar and the car were illuminated with an EMISAR D18.
Vier Light-Painting-Ideen hatte ich vorbereitet. Zwei davon konnte ich umsetzen. Für mehr hat die Zeit leider nicht gereicht. Im Titelbild kam ein Pixelstick zum Einsatz. Ich hatte zuvor eine Rallye-Zielflagge als BMP-File gezeichnet und in den Pixelstick geladen. (mehr Infos zum Tool unten) Nun versuchte ich mit dem Pixelstick den Lauf der Zielflagge bei der Zieleinfahrt nachzuahmen. Der Hangar und das Auto wurde mit einer EMISAR D18 beleuchtet.

Canon EOS 6D Mark II
EF16-35mm ƒ4L IS USM
ISO 100; 16 mm; ƒ8; 49s
In the picture above, I'm practicing the performance with the pixel stick. I found the reflection on the car pretty good, so I didn't want to withhold the picture from you.
Auf dem Bild oben übte ich die Performance mit dem Pixelstick ein. Die Reflexion auf dem Auto fand ich schon ziemlich gut, so dass ich euch das Bild nicht vorenthalten wollte.

Canon EOS 6D Mark II
EF16-35mm ƒ4L IS USM
ISO 100; 16 mm; ƒ8; 60s
After that I tried the same performance again with the Pixelstick and Gunnar lit the scene behind the AUDI. That looked pretty exciting too.
Danach probierte ich noch einmal die gleiche Performance mit dem Pixelstick und Gunnar beleuchtete die Szene hinter dem AUDI. Das sah auch ziemlich spannend aus.

Canon EOS 6D Mark II
LAOWA 12mm
ISO 100; 12 mm; ƒ11; 270s
Then it was time for the next shot. The four rings of the AUDI logo should be in the picture here. The rings should shine in the headlights. For this I used sparklers and smoke candles. Hans operated the camera during this recording.
Dann wurde es Zeit für den nächsten Schuss. Hier sollten die Vier Ringe vom AUDI-Logo ins Bild. Die Ringe sollten im Scheinwerferlicht strahlen. Dafür benutzte ich Wunder- und Nebelkerzen. Hans bediente während dieser Aufnahme die Kamera.

Canon EOS 6D Mark II
LAOWA 12mm
ISO 100; 12 mm; ƒ11; 233s
Before doing this, I had chalked out the four rings of the logo on the floor and then traced them with some sparklers. That wasn't quite as easy as I had imagined, because in the dark I often couldn't see the previously drawn lines. In the picture above you can see a test. The rings turn out better than the end result. Unfortunately, I only had one smoke cartridge with me, so I couldn't repeat the recording. In addition, I seem to have brought my headlamp into the picture during this experiment. You can't have everything, there's always something.
Zuvor hatte ich mit Kreide die vier Ringe des Logos auf den Boden gezeichnet, um sie dann mit einigen Wunderkerzen nachzuzeichnen. Das war nicht ganz so einfach, wie ich mir das vorgestellt habe, weil ich im Dunklen oft die zuvor gezeichneten Linien nicht mehr sah. Im Bild oben seht ihr einen Test. Die Ringe gelangen besser als die im Endergebnis. Leider hatte ich nur eine Nebelkerze dabei, so dass ich die Aufnahme nicht wiederholen konnte. Ausserdem habe ich bei diesem Versuch scheinbar meine Stirnlampe mit ins Bild gebracht. Man kann nicht alles haben, irgendwas ist immer.

The Tools
As described above, I used a pixel stick for the cover image. I own a few DIY ones. In the picture below you can see a purchased one
Magilight Light Painting Stick
by PHOTOGEAR. I bought a Magilight Master Bundle because I traveled a lot by plane. The advantage is that you get fiberglass, blades, two pixel sticks with a rotating mechanism. You can do a lot with that. Unfortunately, the operation is not without problems. The display is so tiny that I can't operate the device without glasses. When an image is repeated, there is a pause of one second, which required a workaround for this light painting, otherwise I would not have been able to use the device for this light painting. In this case I simply lengthened the BMP file so that no frame repetition was necessary. It works better with my DIY pixel sticks. Below I show what the image looks like which I loaded into the pixel stick and then "played".
Wie oben beschrieben, verwendete ich für das Titelbild einen Pixelstick. Ich besitze einige selbst gebaute. Im Bild unten seht ihr einen gekauften
Magilight Light Painting Stick
von FOTORGEAR. Ich hatte mir ein Magilight Master Bundle gekauft, weil ich sehr viel mit dem Flugzeug gereist bin. Vorteil ist, dass man Glasfiber, Blades, zwei Pixelsticks mit Drehvorrichtung bekommt. Damit kann man schon einiges anstellen. Leider ist die Bedienung nicht ganz unproblematisch. Das Display ist so winzig, dass ich das Gerät nicht ohne Brille bedienen kann. Bei einer Bildwiederholung wird eine Sekunde gewartet, was bei diesem Lightpainting ein Workaround erforderte, sonst hätte ich das Gerät für diese Lightpainting nicht einsetzen können. In diesem Fall habe ich die BMP-Datei einfach verlängert, so dass keine Bildwiederholung nötig war. Bei meinen Eigenbau-Pixel-Sticks klappt das besser. Unten zeige ich, wie das Bild aussieht, welches ich in den Pixel-Stick geladen und dann "abgespielt" habe.

The next light painting adventure is already waiting for me tomorrow. I'll tell you about it next Sunday. So stay tuned!
Morgen wartet bereits das nächste Light-Painting-Abenteuer auf mich. Am nächsten Sonntag werde ich darüber berichten. Also bleib dran!
CandelART
more about me and my art:

WE ARE LIGHT PAINTERS
To help and support the LightPainters community here on Hive I would appreciate your delegation of HivePower. Any amount is appreciated. It does not require much to get started, we are happy for any gesture.
Hive account@lightpainters
How to delegate?
Delegate 50HivePower, [50HP]
Delegate 250HivePower, [250HP]
Delegate 500HivePower, [500HP]
Delegate 1000HivePower, [1000HP]
All the Hive Power will help to upvote the artist's contribution as part of the LightPainters communi