Hello HIVEs!
After six months of absence, I am back on HIVE.
I hope that the software is now running smoothly, because there is a lot of news to report.
I am currently gaining experience in how to use my newly acquired drone for light painting. This will certainly keep me busy for a while, as I am a beginner when it comes to drones. I will report on this here.
Die ersten Flugversuche unternahm ich auf einem abgelegenen Grundstück meines Freundes in Bueno Brandao / Minas Gerais / Brasilien. Hier kann ich niemanden stören oder verletzen. Der Plan war, einen Lichtkreis um einen Baum zu ziehen und die Umgebung mit Hilfe der Drohne auszuleuchten. Die Idee ist sicher nicht ganz neu, schwirrt aber schon seit Jahren durch meinen Kopf und wartet darauf umgesetzt zu werden.
Für dieses Projekt habe ich mir mit Hilfe meines ebenfalls neu erworbenen 3D-Druckers eine Halterung für eine kleine Taschenlampe gebaut. Das Gestell inklusive Taschenlampe bringt ein Gewicht von 41g auf die Waage. Ein Testflug bei Tageslicht zeigte, dass die Drohne damit fertig wird. Die Steuerung funktionierte einwandfrei. Zusätzlich habe ich mir noch einen Diffusor gedruckt, den ich bei Bedarf einfach auf die Lampe Stecken kann. Der Diffusor hat ausserdem den Vorteil, dass er die Montage eines Farbfilters ermöglicht.
In the countryside of Minas Gerais
The first attempt to fly the drone around a tree was successful, as can be seen in the cover photo.
However, it was not necessary to attach an additional lamp to the drone, as the DJI Mini 5 Pro already has a lamp that can be switched on using the remote control supplied. The light is bright enough to illuminate the surroundings.
However, when evaluating the images on the computer, I noticed the drone's position lights in the picture. I didn't think that looked very good. So I repeated the attempt the following night without the position lights. Without the position lights, the drone was much more difficult to control. It is difficult to see in which direction the drone is moving. This created a new problem, because I had set the drone to automatically fly around obstacles. In the darkness, the sensors apparently cannot detect small branches accurately, which ultimately caused the drone to crash.
As you can see in the next picture, the joint of the left arm was damaged. However, an emergency repair with adhesive tape quickly got the drone back in the air.
Der erste Versuch die Drohne um einen Baum kreisen zu lassen, verlief erfolgreich, wie im Titelbild zu sehen ist. Es war allerdings nicht nötig, eine zusätzliche Lampe an die Drohne zu montieren, da die DJI Mini 5 Pro bereits über eine Lampe verfügt, die über die mitgelieferte Fernsteuerung eingeschaltet werden kann. Das Licht ist ausreichend hell, um die Umgebung zu beleuchten. Bei der Auswertung am Computer fielen mir aber die Positionslichter der Drohne im Bild auf. Das fand ich nicht so schick. Also wiederholte ich den Versuch in der darauf folgenden Nacht ohne Positionslichter. Ohne Positionslichter war die Drohne bedeutend schwieriger zu steuern. Es ist schwierig zu erkennen, in welche Richtung die Drohne sich bewegt. Damit begann ein neues Problem, denn ich hatte die Drohne so eingestellt, dass sie Hindernisse automatisch umfliegen soll. In der Finsternis können die Sensoren scheinbar kleine Zweige nicht fehlerfrei erkennen, was die Drohne schließlich zum Absturz brachte. Wie auf dem nächsten Bild erkennen kann, ist dabei das Gelenk des Linken Arms beschädigt worden. Eine Notreparatur mit Klebeband brachte die Drohne aber schnell wieder in die Luft.
The drone with a broken shoulder
The spare part for the drone arrived today. I will repair it tomorrow. There is still a lot to discover and try out. I will ‘delight’ you with it next Sunday. So stay tuned!
Das Ersatzteil für die Drohne ist heute eingetroffen. Ich werde sie morgen reparieren. Es gibt noch sehr viel zu entdecken und auszuprobieren. Damit werde ich dich nächste Woche Sonntag "beglücken". Also bleib dran!.
CandelART
What Is Light Painting?
WE ARE LIGHT PAINTERS
To help and support the LightPainters community here on Hive I would appreciate your delegation of HivePower. Any amount is appreciated. It does not require much to get started, we are happy for any gesture.
How to delegate?
Delegate 50HivePower, [50HP]
Delegate 250HivePower, [250HP]
Delegate 500HivePower, [500HP]
Delegate 1000HivePower, [1000HP]
All the Hive Power will help to upvote the artist's contribution as part of the LightPainters community.