Camera servicing and cleaning

What is this post about, because many will be a little confused.It's a very simple thing that everyone should do at least once a year with their camera.
It is precise and high-quality servicing of the device, cleaning it from dust and quality cleaning and cleaning.
That's how my friend and also a friend at HIVE Hive account@borjan let me have his camera serviced

that's the camera he used in the post

@borjan/my-lifestyle-in-the-winter-of-2014

It's that device

So let's start servicing.
right at the beginning, some screws were rusty, they didn't come off easily, but they still loosened.

Here I managed to separate it as if I were opening oyster shells.

There's a speck of dust stuck there, now I'm going to take it out

Super cleaned piece, but there are still some crumbs

Look at this, you can hardly look through it and see the shot

here is the cleaned eyepiece

Watch this dirty and main optics

And this filter was cleaned to be as it should be

Here is the tube from the focus, the one that goes in and out is full of powder, it will be solved

See how it looks through the eyepiece well, well cleaned

This lens is a little damaged and will have to be polished

To polish the lens I need to make a mount, I found this cork opener

then I began to process and grind it in the workshop

It looks good, but the upper part needs the same

Milling a little more

Now the blank is very smooth

Now you need to put the lens up

It looks good

Even on the other side

There is varnish and a light so I can see how it has been cleaned

This is the result

Next to the small wooden knot is the small head of this rusty nail

To see the parts I cleaned

I don't know if this is scratched or dirty

Now I'm going to clean the housing of the device

Here, Hive account@borjan, there was a problem because one of the screws was damaged and it was difficult to get it

Then I opened this for you and it looks dirty with some rust

Maybe this was the problem, clean it up a bit too

Look how shiny your camera is, I can see how well I cleaned it.
It shines with purity.

Here are almost all the parts until that screw arrives, it is possible that there will be excess parts when it starts to be assembled

Here it would be in a nutshell, how I serviced and cleaned the camera from dust, just so you at HIVE know how it can't be done at home.

And this adventure has come to an end.
See you in the next adventure story.

THE END