^{Image Source}

Lead Accumulator Cell

The lead accumulator cell was constructed by French physicist Gaston Plante in 1859^[1]. Shortly after this construction Camille Alphonse Faure amended it in 1881^[2]. There is a container of glass or rigid rubber in which the dilute sulphuric acid of about 1.24 is filled. There are two lattice plates in the lead. These plates are called grids. Litharge (PbO) paste made in Dilute Sulfuric Acid in the grid's spaces is filled. Works on a grid Positive pole and second Negative pole. In some cells, the red Lead (Pb₃O₄) is filled in positive pole grid and filled in a litharge negative poll grid. Chemical reactions before being charged PbO + H₂SO₄ → PbSO₄ + H₂O In this way, both grids have a mixture of PbO and PbSO₄ initially. Charging Process: To charge the battery, the direct current flows from the external source. Battery chargers are used for this. The positive plate of the cell connects with the positive pole of the battery charger and the negative plate to the negative pole of the charger. When there is an electrical current in the battery, then there is the electrical decomposition of acidic water. H₂O → 2H⁺ + O^-2 Hydrogen ion (H⁺) move toward negative plate and Oxygen ion (O^-2) toward positive plate.

Chemical Reaction is as Follows:-

Positive Plate Reaction PbO + O^2- → PbO₂ + 2e^- PbSO₄ + O^2- + H₂O → PbO₂ + H₂SO₄ + 2e^- Negative Plate Reaction PbO + 2H⁺ + 2e^- → Pb + H₂O PbSO₄ + 2H⁺ + 2e^- → Pb + H₂SO₄ Thus in the charging process, the lead Oxide (PbO₂) on the positive plate and the Spongy lead on the negative plate is formed.

^{Google Source Image} Discharging Process: When the battery is connected to a load in the discharging process, the electric current starts flowing. In this process, hydrogen ion (H⁺) toward the positive plate and oxygen ion (O^-2) move towards the negative plate.

Chemical Reaction is as Follows:-

Positive Plate Reaction PbO₂ + 2H⁺ + 2e^- → PbO + H₂O PbO + H₂SO₄ → PbSO₄ + H₂O Negative Plate Reaction Pb + O^-2 → PbO + 2e^- PbO + H₂SO₄ → PbSO₄ + H₂O The lack of electrons on the positive plate and the excess of electrons on the negative plate. Therefore, the potentiality of the positive plate becomes more than the negative plate potential, whereby the electrons in the circuit start moving from the negative plate to the positive plate. The direction of electric current is the opposite.

Fix Lead Acid battery! Repairs conditions

Continuous use of the battery decreases its efficiency. After some time the battery stops working. this is due to the heat generated by the charging and discharging process. As the temperature increases^[3], the water present in the battery is vaporized, the reduction of water inhibits chemical reactions. We will try to repair the batteries. But we have to keep in mind that the battery is not physically damaged. Lead acid battery works on chemical reactions, the acid used in the reaction is harmful to the skin. Therefore the battery is completely sealed in the Plastic box. It can be repaired without tampering the electrode and internal plate of the battery. To make the battery useful, the lack of water in the chemical reaction must be met. For this, mix a few drops of distilled water inside the battery. And charge the battery on the appropriate volts. This method of repair is only applicable in the battery of inverter, car and motorcycle. Repairing the battery of flashlight, toys and other devices is a waste of time. PbSO4 made on the plate by the evaporation of water in small batteries becomes so rigid that they can not be changed in Pb or PbO by the charging process. Thus the cell gets damaged.

Reference

"Gaston Plante" http://www.corrosion-doctors.org/Biographies/PlantelBio.htm
"Camille Alphonse Faure" https://www.upsbatterycenter.com/blog/camille-alphonse-faure-1840-1898/
"Battery Temperature" https://batteryuniversity.com/index.php/learn/article/charging_at_high_and_low_temperatures

ThankYou! @chnadrakant111